Find a Swivel

The Mosmatic 55.263 DYDI Swivel is a robust, high-pressure stainless steel swivel designed for self-rotating, high-flow cleaning applications such as surface cleaners, spray bars, and parts washers. Built to handle extreme performance requirements, this swivel combines smooth operation, reliability, and durability.

Equipped with a triple bearing system - featuring two radial ball bearings and one thrust ball bearing - the DYDI swivel delivers stable and consistent rotation, even under high loads. The carbide seal system provides exceptional sealing against wear and pressure, while weep holes offer early detection of seal failure. With a pressure capacity of 7300 PSI, this swivel is ideal for industrial-grade cleaning systems operating at high temperatures and RPMs.

Applications

• Industrial and commercial surface cleaners

• High-pressure parts washing systems

• Self-rotating cleaning tools and nozzles

• Rotary spray bars for automated cleaning

• Robotic and high-performance wash systems

Key Features

• Thread In: M22x1.5 Male

• Thread Out: G3/8" Male

• Triple Bearing System: 2 radial + 1 thrust bearing for smooth, stable rotation

• Seal Type: Durable carbide seal for high-pressure applications

• Weep Holes: Built-in alert for seal failure

• High Pressure: Rated up to 7300 PSI

• High-Speed Capability: Operates at up to 2000 RPM

• Heat Resistant: Withstands temperatures up to 250°F

• Material: Full stainless steel for corrosion resistance and long service life

• Compact Form: Ideal for integration in tight or mobile setups

Specs

Pressure: 7300 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: M22x1.5M
Thread Out: G3/8" M
Nominal Width (NW): 1/4"
Wrench Size (SW1): 0.79"
Wrench Size (SW2): 0.63"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.46"
Length 3 (L3): 0.47"
Length 4 (L4): 0.12"
Weight: 23.0 oz

The Mosmatic 39.865 DXTI Swivel is a precision-engineered stainless steel swivel designed for high-RPM, self-rotating applications in advanced cleaning systems. Optimized for parts washers, tire cleaners, and high-pressure (HP) cleaning technology, this swivel combines low-torque operation with long-lasting durability and smooth performance.

Built with a quadruple bearing system - including 2 radial ball bearings and 2 thrust ball bearings - it ensures stable, high-speed rotation. The ceramic seal system offers superior resistance to heat, chemicals, and pressure. Additionally, a side port enables weep capture, minimizing mess and enabling more efficient maintenance monitoring.

With a capacity of 2500 PSI, operation up to 2000 RPM, and 250°F heat resistance, the 39.865 swivel is ideal for demanding cleaning applications requiring strength, longevity, and compact design.

Applications

• High-speed parts washing systems

• Self-rotating tire cleaners

• HP cleaning technology in automotive and industrial use

• Spray bars and rotary nozzles

• Robotics or automated equipment requiring low-torque swivel rotation

Key Features

• Thread In: 1/2" NPT Female

• Thread Out: G1/2" Male

• Material: Stainless steel housing and internal components

• Seal Type: Ceramic seal for superior temperature and chemical resistance

• Quadruple Bearing System: 2 radial + 2 thrust stainless steel ball bearings

• Low Torque Design: Optimized for smooth high-RPM rotation

• Side Weep Connection: Allows seal failure warning and fluid capture

• Max Pressure: 2500 PSI

• Max RPM: 2000

• Max Temperature: 250°F

• Rugged & Compact: Built for high-load, continuous-duty cleaning operations

Specs

Pressure: 2500 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 1/2" NPTF
Thread Out: G1/2" M
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.84"
Length 1 (L1): 3.44"
Length 2 (L2): 4.92"
Length 3 (L3): 0.48"
Diameter (D1): 2.40"
Diameter (D2): 1.12"
TK: 1.97"
Weight: 59.0 oz

The Mosmatic 39.905 DXTI Swivel is a precision-engineered stainless steel swivel designed for high-RPM, self-rotating cleaning systems that require exceptional reliability and durability. Built to perform in parts washers, tire cleaners, and HP cleaning technology, this swivel delivers smooth rotation with very low torque, making it ideal for continuous high-speed operation.

A quadruple bearing system - with 2 radial ball bearings and 2 thrust ball bearings - ensures long-lasting, stable performance. The ceramic seal system offers excellent resistance to heat and chemicals. For added functionality, a side weep connection allows fluid capture and alerts for seal failure, helping maintain system integrity and reduce downtime.

Rated for 2500 PSI, 2000 RPM, and temperatures up to 250°F, this swivel is a reliable solution for industrial environments demanding high-flow and precision.

Applications

• High-speed parts washing equipment

• Self-rotating tire cleaning systems

• HP industrial and automotive cleaning tools

• Rotary spray nozzles and cleaning heads

• Robotic or automated pressure washing systems

Key Features

• Thread In: 1" NPT Female

• Thread Out: G1/2" Male

• Material: All stainless steel construction

• Seal Type: Durable ceramic seal for heat and chemical resistance

• Bearing System: Quadruple bearings (2 radial + 2 thrust)

• Low Torque Operation: Optimized for high-speed self-rotation

• Weep Capture Port: Integrated side connection for seal failure monitoring

• Max Pressure: 2500 PSI

• Max Temperature: 250°F

• Max RPM: 2000

• Compact and Rugged: Ideal for continuous-use cleaning operations

Specs

Pressure: 2500 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 1" NPTF
Thread Out: G1/2" M
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 0.84"
Length 1 (L1): 3.44"
Length 2 (L2): 4.92"
Length 3 (L3): 0.48"
Diameter (D1): 2.40"
Diameter (D2): 1.12"
TK: 1.97"
Weight: 55.9 oz

The Mosmatic DGE Swivel - 34.864 is a high-performance swivel designed for high-pressure, high-flow applications that involve both thrust and radial forces. Built from nickel-plated brass with a stainless steel interior, this swivel offers superior corrosion resistance and is well-suited for industrial, food-grade, and sanitary environments. It features a 1x thrust ball bearing, ensuring dependable performance, smooth, low-RPM operation, and extended service life. With a pressure rating of 4000 PSI and temperature tolerance up to 250°F, it delivers reliable and efficient performance in demanding systems.

Applications:

• High-pressure industrial fluid systems

• Food and beverage processing and sanitation equipment

• Chemical transfer and washdown stations

• Low-RPM, high-torque fluid handling applications

Key Features:

• Durable nickel-plated brass housing with stainless steel internals

• With 1x thrust ball bearing

• Engineered for both thrust and radial load handling

• High-flow capacity with excellent corrosion resistance

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 3.39"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF 

Thread Out: G2 3/4"NPTF 

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.26

Wrench Size 2 (SW2): 1.57

Diameter (D): 1.97"

Length 1 (L1) (overall length): 3.39"

Length 2 (L2): 2.38

Weight: 31.8oz

The Mosmatic DGE Swivel - 34.853 is a high-performance swivel engineered for high-pressure fluid systems in industrial and food service environments. Constructed from nickel-plated brass with a stainless steel interior, this swivel is designed to manage both thrust and radial forces with exceptional durability. It features a 1x thrust ball bearing, ensuring dependable performance. With high-flow capabilities and a corrosion-resistant design, this swivel is built to perform in tough applications involving heat, pressure, and demanding sanitation requirements.

Applications:

• Industrial high-pressure fluid and cleaning systems

• Food and beverage processing and sanitation equipment

• Washdown stations and chemical delivery lines

• High-flow, low-RPM rotary connections

Key Features:

• Durable nickel-plated brass body with stainless steel interior

• With 1x thrust ball bearing

• Handles both thrust and radial loads

• Optimized for high-flow and high-pressure environments

• Corrosion-resistant for harsh or sanitary conditions

• Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM

• Nominal Width (NW): 1/2"

• Diameter: 0.59"

• Overall Length: 3.15"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2"NPTF

Thread Out: G2 1/2"NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 0.87

Wrench Size 2 (SW2): 1.38

Diameter (D): 0.59"

Length 1 (L1) (overall length): 3.15"

Length 2 (L2): 2.17

Length 3 (L3): 0.59

Weight: 18.9oz

The Mosmatic WDRS Swivel 41.462 is a premium stainless steel swivel coupling designed for high-pressure hose reels, automatic car wash systems, and industrial high-flow applications. Built for durability and dependable performance, this swivel ensures smooth, stable rotation and effective leak prevention even in the toughest operating environments.

Equipped with a dual bearing system featuring 2x radial ball bearings and an NBR O-ring seal, the WDRS 41.462 provides reliable, low-friction operation while extending service life and reducing maintenance requirements. Its corrosion-resistant stainless steel body makes it ideal for water, chemical, and compressed air use.

This model features a Thread In of 1" NPTF and a Thread Out of 1" NPTF, with a nominal width (NW) of 1", an overall diameter of 2.20", and a length of 6.16". Rated for up to 3000 PSI, it operates efficiently at speeds up to 110 RPM and temperatures ranging from 40°F to 180°F. It supports media within a pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• Automatic car wash systems

• Industrial high-pressure hose reels

• High-flow water and chemical transfer lines

• Pneumatic and compressed air tool systems

• Rotary spray equipment and surface cleaners

• Commercial cleaning and spraying systems

Features

• Rugged stainless steel construction for corrosion resistance and durability

• Dual bearing system with 2x radial ball bearings for smooth rotational performance

• NBR O-ring seal for reliable leak prevention and long service life

• Thread In: 1" NPTF | Thread Out: 1" NPTF

• Nominal Width (NW): 1"

• Max Pressure: 3000 PSI

• Max Temperature Range: 40°F to 180°F

• Max RPM: 110

• Overall Diameter: 2.20" | Overall Length: 6.16" | Height: 1.89"

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs 

Pressure: 3000 psi

Temperature: 40°F - 180°F

RPM: max 110

Material Type:  Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 1" NPTF

Thread Out: G2 1" NPTF

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Wrench Size 2 (SW2): 1.42

Height (H): 1.89

Length 1 (L1) (overall length) : 6.16

Length 2 (L2): 3.94

Length 3 (L3): 3.72

Diameter (D) (overall diameter): 2.20

Weight: 57 oz

The Mosmatic DYL Swivel 56.154 is a robust, high-performance swivel crafted from nickel-plated brass, designed for use in high-speed, high-pressure cleaning systems. Ideal for parts washers, tire cleaners, and rotary equipment, this swivel features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth and stable rotation. The integrated carbide seal system ensures excellent leak resistance, while the corrosion-resistant construction guarantees long-term durability. With a bulkhead fitting for secure mounting, this swivel is fully maintenance-free and built for demanding industrial applications.

Applications

• High-pressure cleaning systems

• Parts washers

• Tire and wheel cleaning equipment

• High-speed rotary spray tools

• Commercial and industrial wash systems

Key Features

• Durable brass body with corrosion-resistant nickel plating

• Triple bearing system: 2x radial, 1x thrust ball bearing

• Carbide seal system for long-lasting leak protection

• Designed for high-speed, high-pressure operation

• Maintenance-free performance

• Bulkhead fitting for secure, fixed installation

• Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTF

• Max Pressure: 4000 PSI

• Max RPM: 2000

• Max Temperature: 250°F

• Overall Diameter: 0.98"

• Overall Length: 3.42"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

Specs 

Pressure: 4000 psi

Temperature: 250°

RPM: max 2,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless Steel

Seal: Carbide

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 3.42"

Diameter (D1): 0.98"

Weight: 8.2 oz

The Mosmatic DYCI Swivel 55.051 is engineered for durability and performance in high-flow, high-pressure applications. Made from premium stainless steel, this self-rotating swivel is ideal for demanding industrial environments where reliability is critical. Equipped with a triple bearing system—featuring two radial ball bearings and one thrust ball bearing—it ensures smooth rotation and extended service life.

This swivel also includes a carbide seal system and weep holes that provide early warning of seal failure, adding an extra layer of protection and performance integrity. With a pressure rating of up to 5000 PSI, the DYCI 55.051 is built to handle tough jobs with precision.

Applications

• Surface cleaners

• High-pressure part washers

• Industrial cleaning equipment

• Self-rotating wash systems

Key Features

• Durable stainless steel construction for long-lasting use

• Triple bearing system (2x radial, 1x thrust) for smooth rotation

• Carbide seal system with weep holes for seal failure alert

• Rated for up to 5000 PSI

• Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTM

• Overall diameter: 2.36" | Overall length: 2.28"

• Nominal width (NW): 1/4" | Wrench size (SW): 0.87" & 0.63"

Specs

Pressure: 5000 psi

Temperature: 250°

RPM: max 2,000 rpm

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: Carbide

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: 1/4"NPTF

Thread Out: 1/4"NPTM

Nominal Width (NW): 1/4"

Wrench Size (SW1): 0.87

Wrench Size (SW2): 0.63

Diameter (D1) (overall diameter): 2.36"

Diameter 2 (D2): 1.10"

Length 1 (L1) (overall length): 2.28"

Length 2 (L2): 1.46"

Length 3 (L3): 0.39"

Length 4 (L4): 0.12"

Weight: 23 oz

The Mosmatic DGR Swivel - 34.411 is a high-performance stainless steel swivel engineered for use in high-pressure systems where both thrust and radial forces are present. Ideal for industrial and food service applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for optimal load distribution and smooth rotation. Built for high-flow applications, its stainless steel body provides excellent corrosion resistance in harsh environments, ensuring long-lasting durability and consistent performance.

Applications:

• Industrial high-pressure fluid systems

• Food processing and sanitary washdown equipment

• Chemical handling and transfer systems

• High-flow rotary joints in automated processes

Key Features:

• Corrosion-resistant stainless steel construction

• Quadruple bearing system: 2x radial + 2x thrust ball bearings

• Designed to handle both thrust and radial loads

• High-flow capability for efficient performance

• Thread IN: 1" NPTF | Thread OUT: 1" NPTM

• Nominal Width (NW): 1"

• Diameter: 2.36"

• Overall Length: 5.31"

• Max Pressure: 3000 PSI

• Max RPM: 130

• Operating Temperature Range: 40°F to 180°F

Specs

Pressure: 3000 psi

Temperature: 40°F - 180°F

RPM: 130

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTM

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.81

Wrench Size 2 (SW2): 1.42

Diameter (D): 2.36"

Length 1 (L1) (overall length): 5.31"

Length 2 (L2): 3.78

Length 3 (L3): 0.71

Weight: 59oz

The Mosmatic DGE Swivel - 34.783 is a high-quality stainless steel swivel designed for high-pressure fluid systems that demand durability and precision. Engineered to handle both thrust and radial forces, this swivel features a robust bearing system with 1x thrust ball bearing and 2x sliding bearings for smooth, long-lasting performance. With a pressure rating of 5000 PSI and a temperature tolerance up to 250°F, it's perfectly suited for continuous operation in pharmaceutical, food service, industrial, and automatic car wash applications.

Applications:

• Pharmaceutical clean-in-place (CIP) systems

• Food and beverage processing and sanitation

• Industrial high-pressure washdown and chemical delivery

• Rotary spray systems in car washes

Key Features:

• Corrosion-resistant stainless steel construction

• With 1x thrust ball bearing and 2 x sliding bearings

• Built to handle both thrust and radial loads

• High-flow, low-RPM design optimized for long service life

• Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF

• Nominal Width (NW): 1/2"

• Diameter: 1.65"

• Overall Length: 3.82"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2"NPTF

Thread Out: G2 1/2"NPTF

Nominal Width (NW): 1/2"

Wrench Size (SW1): 1.06

Diameter 1 (D1): 1.65"

Diameter 2 (D2): 1.65

Length 1 (L1) (overall length): 3.82"

Length 2 (L2): 2.09

Length 4 (L4): 0.63

Length 5 (L5): 0.63

Weight: 22.8oz

The Mosmatic DGE Swivel - 34.865 is a robust and corrosion-resistant swivel designed for high-pressure applications that require dependable performance under both thrust and radial loads. Built with a nickel-plated brass body and a stainless steel interior, this swivel is ideal for industrial, food-grade, and sanitary fluid systems. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth, stable operation in high-flow, low-RPM environments. Rated up to 2900 PSI and capable of withstanding temperatures up to 250°F, this swivel delivers both durability and precision.

Applications:

• High-pressure industrial fluid transfer

• Food and beverage processing equipment

• Cleaning, washdown, and sanitation systems

• Chemical and water handling in hygienic environments

Key Features:

• Corrosion-resistant nickel-plated brass housing with stainless steel internal parts

• With 1x thrust ball bearing

• Designed to manage both thrust and radial forces

• High-flow performance for pressure-sensitive operations

• Thread IN: 1" NPTF | Thread OUT: 1" NPTF

• Nominal Width (NW): 1"

• Diameter: 2.36"

• Overall Length: 3.56"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTF

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Wrench Size 2 (SW2): 1.97

Diameter (D): 2.36"

Length 1 (L1) (overall length): 3.56"

Length 2 (L2): 2.36

Weight: 44.0oz

The Mosmatic DGE Swivel - 34.867 is a heavy-duty, high-flow swivel engineered for demanding high-pressure applications that involve thrust and radial forces. Featuring a nickel-plated brass body and stainless steel interior, this swivel offers excellent corrosion resistance and is ideal for use in both industrial and food service environments. Equipped with a 1x thrust ball bearing, ensuring dependable performance, it provides smooth rotation and long-lasting performance under continuous use. Rated for 2900 PSI and up to 250°F, this swivel is built for durability and fluid transfer efficiency.

Applications:

• High-pressure industrial fluid systems

• Food and beverage processing and washdown

• Sanitary and chemical handling systems

• Low-RPM, high-flow rotary connections

Key Features:

• Nickel-plated brass housing with corrosion-resistant stainless steel internals

• With 1x thrust ball bearing

• Handles both thrust and radial force loads

• High-flow performance for heavy-duty use

• Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF

• Nominal Width (NW): 1 1/2"

• Diameter: 3.35"

• Overall Length: 4.15"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/2"NPTF

Thread Out: G2 1 1/2"NPTF

Nominal Width (NW): 1 1/2"

Wrench Size 1 (SW1): 2.13

Wrench Size 2 (SW2): 2.76

Diameter (D): 3.35"

Length 1 (L1) (overall length): 4.15"

Length 2 (L2): 2.87

Weight: 93.9oz

The Mosmatic DGE Swivel - 34.875 is a compact, high-flow swivel engineered to handle thrust and radial forces in high-pressure environments. Built with a nickel-plated brass housing and a stainless steel interior, it delivers superior corrosion resistance and durability in industrial and food-grade settings. Featuring a one thrust ball bearing, ensuring dependable performance, this swivel provides smooth, low-RPM operation and long-lasting reliability. Rated for 2900 PSI and up to 250°F, it is ideal for applications requiring robust performance in tight spaces.

Applications:

• High-pressure cleaning and fluid systems

• Food and beverage sanitation and processing equipment

• Chemical transfer and washdown operations

• Industrial hose reels and rotary connections

Key Features:

• Nickel-plated brass body with stainless steel interior

• With 1x thrust ball bearing

• Engineered to manage both thrust and radial forces

• Corrosion-resistant for industrial and sanitary use

• Compact design with high-flow capability

• Thread IN: 1" NPTF | Thread OUT: 1" NPTM

• Nominal Width (NW): 1"

• Diameter: 2.36"

• Overall Length: 1.42"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTM

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Diameter (D1): 2.36"

Diameter 2 (D2): 2.83

Length 1 (L1) (overall length): 1.42"

Length 2 (L2): 2.52

Length 3 (L3): 0.71

Length 4 (L4): 1.18

Length 5 (L5): 0.83

Weight: 74.2oz

The Mosmatic DGE Swivel - 34.885 is a high-flow, corrosion-resistant swivel built for high-pressure applications requiring smooth handling of both thrust and radial forces. Constructed from nickel-plated brass with a stainless steel interior, this swivel is well-suited for industrial, sanitary, and food service environments. With 1x thrust ball bearing, delivering consistent performance under continuous use. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, this swivel ensures durability and reliable flow in demanding operations.

Applications:

• Industrial fluid and pressure wash systems

• Food and beverage processing and sanitation equipment

• Chemical handling and clean-in-place systems

• High-pressure hose reels and rotary joints

Key Features:

• Nickel-plated brass body with stainless steel internal components

• With 1x thrust ball bearing

• Supports both radial and thrust force loads

• High-flow, corrosion-resistant design

• Thread IN: 1" NPTF | Thread OUT: 1" NPTF

• Nominal Width (NW): 1"

• Diameter: 2.36"

• Overall Length: 4.55"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTF

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Diameter (D1): 2.36"

Diameter 2 (D2): 2.83

Length 1 (L1) (overall length): 4.55"

Length 2 (L2): 2.52

Length 4 (L4): 1.18

Length 5 (L5): 0.83

Weight: 71.4oz

The Mosmatic WDRS Swivel 41.920 is a high-performance stainless steel swivel designed for high-pressure hose reels, automatic car wash systems, and industrial high-flow applications. Engineered for reliable rotation and long service life, this swivel provides exceptional performance in demanding environments where durability and leak-free operation are essential.

Featuring a robust dual bearing system with 2x radial ball bearings and an NBR O-ring seal, the WDRS 41.920 ensures smooth, stable rotation with effective leak prevention. Its stainless steel construction delivers excellent corrosion resistance, making it suitable for water, chemicals, and compressed air systems.

This swivel offers a Thread In of 1/2" NPTF and a Thread Out of 1/2" NPTM, with a nominal width of 1/2", overall diameter of 1.77", and length of 6.10". Rated for pressures up to 3000 PSI, the unit operates at speeds up to 150 RPM and temperatures ranging from 40°F to 180°F. Compatible with media in the pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• Automatic car wash systems

• Industrial high-pressure hose reels

• High-flow water and chemical transfer lines

• Pneumatic and compressed air tool connections

• Rotary spray equipment and surface cleaners

• Commercial cleaning and spraying systems

Features

• Stainless steel construction for superior corrosion resistance and durability

• Dual bearing system with 2x radial ball bearings for smooth, stable rotation

• NBR O-ring seal for reliable leak protection and extended service life

• Thread In: 1/2" NPTF | Thread Out: 1/2" NPTM

• Nominal Width (NW): 1/2"

• Max Pressure: 3000 PSI

• Max Temperature Range: 40°F to 180°F

• Max RPM: 150

• Overall Diameter: 1.77" | Overall Length: 6.10" | Height: 1.57"

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs 

Pressure: 3000 psi

Temperature: 40°F - 180°F

RPM: max 150

Material Type:  Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 1/2" NPTF

Thread Out: G2 1/2" NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 1.06

Height (H): 1.57

Length 1 (L1) (overall length) : 6.10

Length 2 (L2): 2.76

Length 3 (L3): 0.60

Length 4 (L4): 3.31

Diameter (D) (overall diameter): 1.77

Weight: 33 oz