Find a Swivel

The Mosmatic DGL Swivel 31.163 is a high-performance brass, nickel-plated swivel designed to withstand radial and thrust forces in high-pressure, high-flow environments. Ideal for automatic car wash systems and high-pressure hose reels, this swivel combines precision engineering with long-term durability.

Equipped with a triple bearing system—two radial ball bearings and one thrust bearing—this model ensures smooth operation and high load capacity. It features an O-ring NBR seal system, with optional EPDM or FKM seals for extended chemical compatibility. With corrosion-resistant construction and bulkhead mounting, the DGL 31.163 is maintenance-free and engineered for maximum performance.

Applications

• Automatic and tunnel car wash systems

• High-pressure hose reels

• Commercial vehicle wash bays

• Industrial pressure washing

• Rotating equipment in cleaning systems

Key Features

• Model: Mosmatic DGL 31.163

• Material: Brass, Nickel-Plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): G3/8" M

• Seal Type: O-ring NBR (Optional: EPDM or FKM)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Mounting: Bulkhead fitting

• Corrosion Resistant: Yes

• Maintenance: Maintenance-free design

• Overall Diameter: 0.98"

• Overall Length: 2.59"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Temperature Range:

  • 90°F at 1000 RPM

  • Up to 250°F at 30 RPM

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 G3/8" M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.59"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.98"

Weight: 5.7 oz

The Mosmatic DGL Swivel 31.153 is a high-performance brass swivel, nickel plated for enhanced corrosion resistance. Engineered to withstand both thrust and radial forces, it is ideal for high-flow applications such as automatic car wash systems and high-pressure hose reels.

Equipped with a triple bearing system—two radial and one thrust ball bearing—this swivel delivers long-lasting performance under high-stress conditions. It features a reliable O-ring NBR seal system, with optional EPDM or FKM materials for improved chemical resistance. Designed for bulkhead mounting, this swivel ensures efficient operation and maintenance-free use even in demanding environments.

Applications

• Automatic and tunnel car wash systems

• High-pressure hose reels

• Industrial cleaning equipment

• Gantry wash systems

• High-flow water supply systems

Key Features

• Model: Mosmatic DGL 31.153

• Material: Brass, nickel plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Corrosion Resistant: Yes

• Mounting Type: Bulkhead

• Overall Diameter: 0.98"

• Overall Length: 2.59"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Maximum Pressure: 4000 PSI

• Maximum RPM: 1000

• Temperature Range:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Maintenance: Maintenance-free design

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.59"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.98"

Weight: 5.8 oz

The Mosmatic DGL Swivel 31.051 is a brass, nickel-plated high-flow swivel engineered for handling thrust and radial forces in automatic car washes, high-pressure hose reels, and industrial cleaning systems. Built to withstand rigorous use, it ensures long-lasting, maintenance-free performance in both fixed and rotating setups.

Featuring a triple bearing system (2x radial and 1x thrust ball bearing), this swivel allows for stable, reliable rotation under high-pressure conditions. The O-ring NBR sealing system provides leak-proof operation and is upgradeable to EPDM or FKM seals for enhanced chemical compatibility. With a bulkhead mounting configuration and corrosion-resistant body, the DGL 31.051 is a trusted solution for demanding cleaning applications.

Applications

• Automatic car wash systems

• High-pressure hose reels

• Robotic wash arms and gantry systems

• Industrial cleaning equipment

• High-flow pressure washing systems

Key Features

• Design: Straight inline swivel

• Material: Brass, nickel plated

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple (2x radial, 1x thrust)

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 1/4" NPTM

• Overall Diameter: 0.98"

• Overall Length: 2.55"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Mounting Type: Bulkhead fitting

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 1/4" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.62"

Length 1 (L1) (overall length) : 2.55"

Length 2 (L2): 0.43"

Diameter (D) (overall diameter): 0.98"

Weight: 5.7 oz

The Mosmatic DGE Swivel - 34.873 is a high-performance swivel designed to withstand thrust and radial forces in demanding high-pressure applications. Crafted from nickel-plated brass with a stainless steel interior, it offers excellent corrosion resistance and durability for both industrial and food-grade use. Including one thrust ball bearing, ensures smooth and stable operation in high-flow systems. With a 4000 PSI pressure rating and temperature resistance up to 250°F, this swivel is built for reliable performance in continuous-use environments.

Applications:

• High-pressure cleaning and fluid handling systems

• Food and beverage sanitation and processing lines

• Chemical and washdown systems

• Industrial hose reels and rotary equipment

Key Features:

• Nickel-plated brass housing with stainless steel internal components

• With 1x thrust ball bearing

• Designed to support both thrust and radial loads

• Corrosion resistant and ideal for sanitary environments

• High-flow capacity with low-RPM stability

• Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM

• Nominal Width (NW): 1/2"

• Diameter: 1.64"

• Overall Length: 3.81"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2"NPTF

Thread Out: G2 1/2"NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 0.87

Diameter (D1): 1.64"

Diameter 2 (D2): 1.64

Length 1 (L1) (overall length): 3.81"

Length 2 (L2): 2.09

Length 3 (L3): 0.59

Length 4 (L4): 0.63

Length 5 (L5): 0.75

Weight: 23.2oz

The Mosmatic DGL Swivel 31.154 is a brass, nickel-plated swivel designed to handle thrust and radial forces in high-pressure, high-flow cleaning systems. Engineered for efficiency and reliability, it’s ideal for automatic car wash setups, hose reels, and other demanding cleaning environments.

Featuring a triple bearing system (2 radial and 1 thrust bearing) and an O-ring NBR seal system with optional EPDM or FKM upgrades, this swivel ensures long-lasting, low-maintenance performance. Its corrosion-resistant nickel-plated finish offers added durability in tough conditions.

Applications

• Automatic car wash systems

• High-pressure hose reels

• Vehicle wash bays

• Industrial cleaning systems

• Water recovery and undercarriage cleaning

Key Features

• Model: Mosmatic DGL 31.154

• Material: Brass, nickel plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTF

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Mounting Type: Bulkhead

• Corrosion Resistant: Yes

• Maintenance: Maintenance-free

• Overall Diameter: 0.98"

• Overall Length: 2.87"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.87"

Diameter (D) (overall diameter): 0.98"

Weight: 6.5 oz

The Mosmatic DGE Swivel - 34.877 is a robust, high-flow swivel engineered for demanding high-pressure fluid systems where both thrust and radial forces are present. Constructed from nickel-plated brass with a stainless steel interior, it offers superior corrosion resistance and long-lasting durability in industrial and sanitary environments. Featuring one thrust ball bearing ensures smooth, stable operation under continuous use. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, this swivel is ideal for heavy-duty applications.

Applications:

• Industrial high-pressure washdown and fluid transfer

• Food and beverage processing systems

• Sanitary chemical delivery and cleaning lines

• High-volume rotary fluid connections

Key Features:

• Nickel-plated brass housing with stainless steel internal components

• With 1x thrust ball bearing

• Corrosion-resistant and built for sanitary or industrial use

• High-flow performance with support for radial and thrust loads

• Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM

• Nominal Width (NW): 1 1/2"

• Diameter: 3.35"

• Overall Length: 5.71"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/2"NPTF

Thread Out: G2 1 1/2"NPTM

Nominal Width (NW): 1 1/2"

Wrench Size 1 (SW1): 2.05

Diameter (D1): 3.35"

Diameter 2 (D2): 3.98

Length 1 (L1) (overall length): 5.71"

Length 2 (L2): 2.99

Length 3 (L3): 0.79

Length 4 (L4): 1.66

Length 5 (L5): 1.18

Weight: 175.4oz

The Mosmatic DGE Swivel - 34.857 is a heavy-duty, high-flow swivel designed for managing thrust and radial forces in high-pressure systems. Constructed with a nickel-plated brass body and a stainless steel interior, this swivel is corrosion resistant and built for durability in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, and smooth, consistent operation. Capable of withstanding pressures up to 2900 PSI and temperatures up to 250°F, it is ideal for demanding cleaning and fluid transfer applications.

Applications:

• High-pressure fluid transfer systems

• Food and beverage processing and washdown lines

• Industrial cleaning equipment

• Chemical and sanitary fluid systems

Key Features:

• Corrosion-resistant nickel-plated brass housing with stainless steel internals

• With 1x thrust ball bearing

• Handles both thrust and radial loads

• High-flow design for low-RPM, high-pressure systems

• Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM

• Nominal Width (NW): 1 1/2"

• Diameter: 3.35"

• Overall Length: 4.41"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/2"NPTF

Thread Out: G2 1 1/2"NPTM

Nominal Width (NW): 1 1/2"

Wrench Size 1 (SW1): 2.05

Wrench Size 2 (SW2): 2.76

Diameter (D): 3.35"

Length 1 (L1) (overall length): 4.41"

Length 2 (L2): 2.87

Length 3 (L3): 0.79

Weight: 95.3oz

The Mosmatic DGE Swivel - 34.765 is a rugged, high-flow stainless steel swivel designed for high-pressure applications where thrust and radial forces must be managed reliably. Equipped with 1x thrust ball bearing and 2x sliding bearings, this swivel delivers stable, low-RPM rotation and long-term durability. Its corrosion-resistant stainless steel construction makes it ideal for demanding environments such as pharmaceutical processing, food and beverage sanitation, automatic car wash systems, and industrial fluid handling.

Applications:

• Food and beverage cleaning and transfer systems

• Pharmaceutical production and CIP processes

• Rotary spray arms in car wash systems

• Industrial chemical handling and washdown

Key Features:

• Corrosion-resistant stainless steel housing

• With 1x thrust ball bearing and 2 x sliding bearings

• Handles both thrust and radial loads under high pressure

• High-flow design with smooth low-RPM operation

• Thread IN: 1" NPTF | Thread OUT: 1" NPTF

• Nominal Width (NW): 1"

• Diameter: 2.35"

• Overall Length: 3.54"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTF

Nominal Width (NW): 1"

Wrench Size 1 (SW1): 1.42

Wrench Size 2 (SW2): 1.97

Diameter (D1): 2.35"

Length 1 (L1) (overall length): 3.54"

Length 2 (L2): 2.56

Weight: 44oz

The Mosmatic DGE Swivel - 34.884 is a high-performance, corrosion-resistant swivel designed for high-pressure fluid systems where both thrust and radial forces are present. Constructed with a nickel-plated brass housing and a stainless steel interior, this swivel is ideal for industrial and food-grade applications requiring durability and hygiene. With one thrust ball bearing, offering reliable rotation and smooth operation even under continuous use. Rated for up to 4000 PSI and 250°F, it supports high-flow performance in rigorous environments.

Applications:

• Industrial high-pressure fluid and washdown systems

• Food and beverage processing and sanitation lines

• Chemical transfer and hygienic applications

• Rotary connections in hose reels and cleaning systems

Key Features:

• Nickel-plated brass construction with stainless steel internals

• With 1x thrust ball bearing

• Engineered for both thrust and radial load stability

• High-flow capacity and corrosion resistance

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF

• Nominal Width (NW): 3/4"

• Diameter: 1.96"

• Overall Length: 4.29"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTF

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.26

Diameter (D1): 1.96"

Diameter 2 (D2): 1.96

Length 1 (L1) (overall length): 4.29"

Length 2 (L2): 2.40

Length 4 (L4): 0.75

Length 5 (L5): 0.87

Weight: 36.0oz

The Mosmatic DGE Swivel - 34.854 is a high-pressure, high-flow swivel designed for industrial and food service applications where both thrust and radial forces must be managed with precision. Constructed from nickel-plated brass with a stainless steel interior, this swivel offers excellent corrosion resistance and durability in demanding environments. The swivel includes a 1x thrust ball bearing, ensuring dependable performance, ideal for fluid transfer systems requiring strength, efficiency, and sanitation compliance.

Applications:

• Industrial high-pressure fluid and washdown systems

• Food and beverage processing equipment

• Chemical handling and sanitation systems

• Low-speed, high-pressure rotary unions

Key Features:

• Nickel-plated brass body with stainless steel internal components

• With 1x thrust ball bearing

• Designed to withstand both thrust and radial forces

• High-flow capacity with low maintenance requirements

• Corrosion-resistant for industrial and sanitary use

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 3.46"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.06

Wrench Size 2 (SW2): 1.57

Diameter (D): 1.97"

Length 1 (L1) (overall length): 3.46"

Length 2 (L2): 2.38

Length 3 (L3): 0.63

Weight: 27.8oz

The Mosmatic DGL Swivel 31.052 is a brass, nickel-plated swivel engineered for high-flow and high-pressure applications such as automatic car wash systems, hose reels, and industrial cleaning setups. Designed to withstand both thrust and radial forces, this swivel offers optimal performance in continuous-use operations.

With a triple bearing system (2x radial ball bearings, 1x thrust ball bearing) and a robust O-ring NBR seal system—with optional upgrades to EPDM or FKM—this swivel ensures longevity, smooth rotation, and corrosion resistance. It features a bulkhead mount, is maintenance-free, and built for maximum reliability and durability.

Applications

• Automatic car wash systems

• High-pressure hose reels

• Industrial and commercial cleaning

• Mobile wash units

• High-flow self-rotating equipment

Key Features

• Model: Mosmatic DGL 31.052

• Material: Brass, nickel plated

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 1/4" NPTF

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Mounting Style: Bulkhead fitting

• Corrosion Resistant: Yes

• Maintenance: Maintenance-free

• Overall Diameter: 0.98"

• Overall Length: 2.75"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 1/4" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.75"

Diameter (D) (overall diameter): 0.98"

Weight: 6.4 oz

The Mosmatic DGLI Swivel 31.902 is a high-precision stainless steel swivel, engineered for thrust and radial force applications in demanding environments. Designed for high-flow systems, this swivel is ideal for automatic car washes and high-pressure hose reels.

This model features a triple bearing system with two radial and one thrust ball bearing, offering optimal stability and durability. The O-ring NBR seal system ensures a secure seal under pressure, with optional EPDM or FKM seals available for enhanced chemical resistance. Its corrosion-resistant stainless steel body and bulkhead mount design provide long-term reliability with zero maintenance requirements.

Applications

• Automatic car wash systems

• Gantry and tunnel wash equipment

• High-pressure hose reels

• Industrial cleaning systems

• High-flow water transfer

Key Features

• Model: Mosmatic DGLI 31.902

• Material: Stainless Steel

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTM

• Seal Type: O-ring NBR (EPDM or FKM optional)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Corrosion Resistant: Yes

• Mounting Style: Bulkhead

• Overall Diameter: 0.98"

• Overall Length: 2.59"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Temperature Range:

  • Up to 90°F at 1000 RPM

  • Up to 250°F at 30 RPM

• Maintenance: Maintenance-free design

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.59"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.98"

Weight: 5.8 oz

The Mosmatic DGE Swivel - 34.753 is a precision-engineered stainless steel swivel built for high-pressure, high-flow applications in demanding environments. Designed to manage thrust and radial forces, this swivel features 1x thrust ball bearing and 2x sliding bearings for long-lasting, stable performance. Ideal for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems, it offers a corrosion-resistant design, a 5000 PSI pressure rating, and heat resistance up to 250°F.

Applications:

• Pharmaceutical manufacturing and clean-in-place systems

• Food and beverage processing and sanitation lines

• Automatic car wash sprayers and rinsing systems

• Industrial washdown and fluid transfer systems

Key Features:

• Durable stainless steel body for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• High-flow design supports efficient liquid transfer

• Withstands both thrust and radial loads

• Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM

• Nominal Width (NW): 1/2"

• Diameter: 1.65"

• Overall Length: 2.17"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/2"NPTF

Thread Out: G2 1/2"NPTM

Nominal Width (NW): 1/2"

Wrench Size 1 (SW1): 0.87

Wrench Size 2 (SW2): 1.38

Diameter (D1): 1.65

Length 1 (L1) (overall length): 2.17"

Length 2 (L2): 2.17

Length 3 (L3): 0.59

Weight: 18.9oz

The Mosmatic DGE Swivel - 34.874 is a durable, high-pressure swivel engineered for demanding applications that require consistent support for both thrust and radial forces. Constructed from nickel-plated brass with a stainless steel interior, it is designed to withstand corrosion in industrial and food-grade environments. Featuring a 1x thrust ball bearing, ensuring dependable performance., this swivel ensures smooth rotation, and long-term reliability. Rated up to 4000 PSI and 250°F, it’s ideal for high-performance fluid transfer systems.

Applications:

• High-pressure cleaning and washdown equipment

• Food and beverage processing systems

• Sanitary fluid handling and chemical transfer

• Industrial hose reels and rotary connections

Key Features:

• Nickel-plated brass body with stainless steel internal components

• With 1x thrust ball bearing

• Corrosion-resistant and suitable for sanitary use

• Supports thrust and radial forces in low-RPM operations

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.96"

• Overall Length: 4.37"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 4000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size 1 (SW1): 1.06

Diameter (D1): 1.96"

Diameter 2 (D2): 1.96

Length 1 (L1) (overall length): 4.37"

Length 2 (L2): 2.40

Length 3 (L3): 0.63

Length 4 (L4): 0.75

Length 5 (L5): 0.87

Weight: 35.7oz

The Mosmatic DGE Swivel - 34.886 is a high-performance swivel designed for high-pressure fluid applications that involve both thrust and radial forces. Engineered with a nickel-plated brass body and stainless steel interior, this swivel is corrosion resistant and built for reliability in industrial and food-grade environments. With 1x thrust ball bearing, ensuring smooth operation and long service life. Rated for 2900 PSI and up to 250°F, this swivel supports continuous high-flow performance in demanding systems.

Applications:

• Industrial high-pressure cleaning and fluid transfer

• Food and beverage processing and washdown lines

• Sanitary and chemical delivery systems

• High-flow rotary connections for hose reels and equipment

Key Features:

• Nickel-plated brass housing with stainless steel internals

• With 1x thrust ball bearing

• Manages both thrust and radial loads with ease

• Built for high-pressure, low-RPM performance

• Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF

• Nominal Width (NW): 1 1/4"

• Diameter: 2.36"

• Overall Length: 5.00"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Brass, Nickel Plated

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/4"NPTF

Thread Out: G2 1 1/4"NPTF

Nominal Width (NW): 1 1/4"

Wrench Size 1 (SW1): 1.97

Diameter (D1): 2.36"

Diameter 2 (D2): 3.07

Length 1 (L1) (overall length): 5.00"

Length 2 (L2): 2.01

Length 4 (L4): 1.18

Length 5 (L5): 1.10

Weight: 90.1oz