Products
Sort by:
The Mosmatic DGE Swivel - 34.785 is a durable stainless steel swivel engineered for high-pressure environments requiring precise management of thrust and radial forces. Featuring a reliable bearing system with 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth operation under continuous use. Designed for a max pressure of 2900 PSI and temperature resistance up to 250°F, it is the ideal solution for pharmaceutical, food processing, industrial, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation systems
-
Pharmaceutical clean-in-place (CIP) and processing lines
-
Industrial washdown and chemical distribution
-
Rotary spray arms in automatic car washes
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Engineered to handle both thrust and radial loads
-
High-flow performance designed for low-RPM applications
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.35"
-
Overall Length: 4.65"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size (SW1): 1.42
Diameter 1 (D1): 2.35"
Diameter 2 (D2): 2.83
Length 1 (L1) (overall length): 4.65"
Length 2 (L2): 2.52
Length 4 (L4): 1.18
Length 5 (L5): 1.14
Weight: 74.3oz
The Mosmatic DGE Swivel - 34.786 is a high-performance stainless steel swivel engineered for high-pressure applications that demand reliable management of thrust and radial forces. Equipped with a reliable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent operation even in the most demanding conditions. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is an ideal choice for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems.
Applications:
-
Food and beverage sanitation and processing systems
-
Pharmaceutical clean-in-place (CIP) applications
-
Industrial washdown and fluid transfer
-
Rotary spray systems in automatic car washes
Key Features:
-
Durable stainless steel construction for maximum corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports high-flow, low-RPM, high-pressure applications
-
Designed to handle both thrust and radial loads efficiently
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.37"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTF
Nominal Width (NW): 1 1/4"
Wrench Size (SW1): 1.97
Diameter 1 (D1): 2.76"
Diameter 2 (D2): 3.07
Length 1 (L1) (overall length): 5.37"
Length 2 (L2): 2.84
Length 4 (L4): 1.18
Length 5 (L5): 1.30
Weight: 94.7oz
The Mosmatic DGE Swivel - 34.787 is a robust stainless steel swivel engineered for high-pressure and high-flow systems that must reliably manage thrust and radial forces. Designed with a durable bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, long-lasting performance under continuous use. Rated for 2900 PSI and capable of withstanding temperatures up to 250°F, it is perfect for demanding pharmaceutical, food processing, industrial cleaning, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation lines
-
Pharmaceutical clean-in-place (CIP) systems
-
Industrial fluid handling and high-pressure washdowns
-
Rotary spray arms and booms in automatic car washes
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial loads with high stability
-
High-flow performance designed for low-RPM, high-pressure use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 5.87"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size (SW1): 2.13
Diameter 1 (D1): 3.33"
Diameter 2 (D2): 3.98
Length 1 (L1) (overall length): 5.87"
Length 2 (L2): 3.17
Length 4 (L4): 1.66
Length 5 (L5): 1.42
Weight: 181.5oz
The Mosmatic DGF Swivel 35.004 is a precision-built swivel for high-pressure cleaning applications. Made from nickel-plated brass, it supports demanding wash systems and rotating equipment. It is suited for parts washers, tire cleaners, and self-rotating tools. The high-speed triple bearing system helps provide smooth rotation under load. It is rated for 275 bar and up to 1000 rpm. The flange design helps simplify installation in compatible cleaning systems.
*This specialty item may have long lead times and cannot be returned or refunded.
Specs
Pressure: 275 bar / approx. 3,989 psi
Temperature: 86°F at 1,000 rpm and 248°F at 30 rpm
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Bearing System: High speed triple bearing system
Installation: Flange mount
Maintenance: Maintenance free
Thread In: G1/4 F
Thread Out: G3/8 F
Nominal Width (NW): NW6
Wrench Size 1 (SW1): 22
Wrench Size 2 (SW2): 22
Length: 141 mm
Part Number: 35.004
Brand: Mosmatic
Product Type: DGF high pressure swivel
The Mosmatic DGF Swivel - 35.051 is a high-performance swivel designed for demanding high-pressure cleaning applications. Constructed from durable brass with a nickel-plated finish, this swivel ensures longevity and corrosion resistance. It features a precision-engineered triple bearing system (2x radial ball bearings and 1x thrust ball bearing) for smooth operation and extended service life. Engineered with an O-ring NBR seal, the DGF Swivel is ideal for self-rotating systems, tire cleaners, and parts washers operating under high loads and rotational speeds.
Applications:
-
High-pressure cleaning systems
-
Parts washers
-
Tire cleaning equipment
-
Self-rotating cleaning tools
Key Features:
-
Brass construction with nickel plating for durability
-
Triple bearing system: 2 radial + 1 thrust ball bearing
-
Sealing: O-ring NBR
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4"
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.45"
-
Pressure rating: Up to 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F @ 1000 RPM / 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 1/4"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.67
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.45
Length 2 (L2): 0.43
Weight: 10.4oz
The Mosmatic DGF Swivel - 35.052 is a high-quality swivel engineered for efficient performance in high-pressure cleaning systems. Built from durable brass and finished with corrosion-resistant nickel plating, this swivel is ideal for demanding applications such as parts washers, tire cleaners, and self-rotating cleaning tools. It features a robust triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, long-lasting rotation under pressure. The integrated O-ring NBR seal provides excellent resistance to wear, temperature, and pressure fluctuations.
Applications:
-
High-pressure cleaning equipment
-
Parts washers and degreasers
-
Tire and wheel cleaning systems
-
Self-rotating cleaning tools
Key Features:
-
Durable brass body with nickel plating for corrosion resistance
-
Triple bearing system: 2 radial + 1 thrust ball bearing
-
Reliable O-ring NBR sealing
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.65"
-
Max Pressure: 4000 PSI
-
Max Speed: 1000 RPM
-
Operating Temperatures: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 1/4"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.65
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.053 is a robust, high-pressure swivel engineered for precision and durability in demanding cleaning environments. Crafted from brass with a corrosion-resistant nickel-plated finish, this swivel is ideal for use in tire cleaners, parts washers, and self-rotating cleaning equipment. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for superior rotational performance and extended operational life. An O-ring NBR seal ensures leak-proof performance under high pressure and varying temperatures.
Applications:
-
High-pressure cleaning systems
-
Self-rotating cleaning equipment
-
Parts washers
-
Tire cleaning applications
Key Features:
-
Brass body with nickel plating for long-term durability
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
O-ring NBR seal for reliable performance
-
Thread IN: G1 1/4" NPTF | Thread OUT: G2 3/8" NPTM
-
Nominal Width (NW): 1.4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Pressure rated up to 4000 PSI
-
Max RPM: 1000
-
Max Temperature: 90°F at 1000 RPM / 250°F at 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 1.4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.47
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.054 is a precision-engineered swivel designed for high-performance operation in high-pressure cleaning systems. Constructed from high-quality brass and finished with nickel plating for superior corrosion resistance, this swivel is ideal for use in tire cleaning systems, parts washers, and self-rotating cleaning tools. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, long-lasting performance under high pressure and rotational speeds. The O-ring NBR seal enhances reliability by maintaining a secure seal under varying pressure and temperature conditions.
Applications:
-
High-pressure cleaning equipment
-
Parts washers and cleaning stations
-
Tire and wheel cleaning systems
-
Self-rotating cleaning devices
Key Features:
-
Brass construction with corrosion-resistant nickel plating
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
High-performance O-ring NBR sealing
-
Thread IN: 1/4" NPTF | Thread OUT: 3/8" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.76"
-
Rated for up to 4000 PSI
-
Maximum speed: 1000 RPM
-
Temperature range: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 3/8"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.87
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.76
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.063 is a high-performance swivel built to meet the rigorous demands of industrial cleaning systems. Made from durable brass and finished with corrosion-resistant nickel plating, this swivel delivers long-lasting reliability in high-pressure environments. Its precision-engineered triple bearing system—featuring two radial ball bearings and one thrust ball bearing—ensures smooth rotation and extended service life. Designed with an O-ring NBR seal, this swivel is ideal for applications involving self-rotating tools, tire cleaning equipment, and parts washers.
Applications:
-
High-pressure cleaning technology
-
Tire cleaning equipment
-
Parts washers
-
Self-rotating cleaning systems
Key Features:
-
Durable brass construction with nickel-plated finish
-
Triple bearing system: 2x radial and 1x thrust ball bearing
-
Reliable sealing with O-ring NBR
-
Thread IN: 1/4" NPTF | Thread OUT: G3/8" Male
-
Nominal Width (NW): 1.4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Pressure rating: Up to 4000 PSI
-
Max RPM: 1000
-
Temperature range: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 G3/8"M
Nominal Width (NW): 1.4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.39
Weight: 12.0oz
The Mosmatic DGF Swivel - 35.151 is a durable, high-performance swivel engineered for high-pressure cleaning applications. Constructed from robust brass with a corrosion-resistant nickel-plated finish, this swivel offers reliable operation in tire cleaners, parts washers, and self-rotating cleaning systems. It features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, long-lasting performance. Sealed with an O-ring NBR, it is designed to handle high pressure, rotational speed, and temperature variations in demanding environments.
Applications:
-
High-pressure cleaning systems
-
Tire and wheel cleaning equipment
-
Parts washers
-
Self-rotating cleaning tools
Key Features:
-
Brass body with nickel-plated finish for corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
O-ring NBR seal for enhanced durability and leak prevention
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTM
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.45"
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Temperature Range: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 1/4"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.67
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.45
Length 2 (L2): 0.43
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.152 is a high-performance swivel engineered for demanding high-pressure cleaning applications. Made from durable brass with a corrosion-resistant nickel-plated finish, this swivel ensures reliable performance in harsh environments. It features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—that allows for smooth and consistent rotation. The integrated O-ring NBR seal enhances durability and maintains leak-proof performance under pressure and extreme temperatures, making it ideal for self-rotating systems, tire cleaners, and industrial parts washers.
Applications:
-
High-pressure cleaning systems
-
Self-rotating cleaning tools
-
Tire and wheel cleaning equipment
-
Industrial parts washers
Key Features:
-
Durable brass construction with nickel plating
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Reliable O-ring NBR sealing
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.65"
-
Max Pressure: 4000 PSI
-
Max Speed: 1000 RPM
-
Temperature Limits: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 G2 1/4"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.65
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.153 is a high-quality swivel engineered for precision and durability in high-pressure cleaning environments. Made from solid brass with a corrosion-resistant nickel-plated finish, this swivel is built for long-lasting performance in demanding applications such as tire cleaning systems, parts washers, and self-rotating cleaning equipment. It features a reliable triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth operation under high pressure and rotational stress. A robust O-ring NBR seal ensures excellent resistance to wear, heat, and fluid exposure.
Applications:
-
High-pressure cleaning systems
-
Tire and wheel washers
-
Parts washing machines
-
Self-rotating cleaning devices
Key Features:
-
Durable brass construction with nickel plating for corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
O-ring NBR seal for reliable, leak-free performance
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Rated up to 4000 PSI
-
Max RPM: 1000
-
Operating Temperature: 90°F @ 1000 RPM / 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.47
Weight: 10.4oz
The Mosmatic DGF Swivel - 35.154 is a premium swivel designed for use in high-pressure cleaning systems and self-rotating applications. Constructed from durable brass with a corrosion-resistant nickel-plated finish, this swivel offers long-lasting reliability in industrial environments. Its precision triple bearing system—featuring two radial ball bearings and one thrust ball bearing—ensures smooth rotation under heavy load. The integrated O-ring NBR seal provides dependable sealing performance under high pressure and extreme temperature variations, making it an ideal solution for demanding cleaning operations.
Applications:
-
High-pressure cleaning systems
-
Parts washing equipment
-
Tire and wheel cleaning stations
-
Self-rotating cleaning tools
Key Features:
-
Brass construction with nickel plating for enhanced durability
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
O-ring NBR seal for high-pressure and thermal resistance
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.76"
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Temperature Range: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.87
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.76
Weight: 11.0oz
The Mosmatic DGF Swivel - 35.163 is a premium swivel engineered for high-efficiency cleaning in high-pressure environments. Constructed from brass with a durable nickel-plated finish, it provides excellent corrosion resistance and long-term performance. Designed for use in tire cleaning, parts washing, and self-rotating systems, it features a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth and reliable rotation. An integrated O-ring NBR seal enhances its resistance to temperature, pressure, and wear, making it a dependable solution for industrial and commercial cleaning systems.
Applications:
-
High-pressure cleaning systems
-
Tire and wheel cleaning equipment
-
Parts washers
-
Self-rotating cleaning tools
Key Features:
-
Brass construction with nickel-plated corrosion-resistant finish
-
Triple bearing system: 2 radial + 1 thrust ball bearing
-
O-ring NBR seal for dependable performance
-
Thread IN: 3/8" NPTF | Thread OUT: G3/8" Male
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Rated for up to 4000 PSI
-
Max rotational speed: 1000 RPM
-
Temperature range: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 G3/8"M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.39
Weight: 11.6oz
The Mosmatic DGF Swivel 35.351 is a professional-grade brass swivel designed for demanding high-pressure cleaning applications. Engineered with a nickel-plated finish for durability and corrosion resistance, this swivel ensures long-lasting performance in industrial environments. It incorporates a robust triple bearing system—featuring two radial ball bearings and one thrust ball bearing—for smooth, reliable rotation in both static and dynamic operations. Compatible with a variety of systems, the DGF swivel is an essential component for improving functionality and efficiency in pressure-based cleaning technologies.
Applications
-
High-pressure cleaning technology
-
Parts washer systems
-
Tire cleaning equipment
-
Self-rotating cleaning applications
Key Features
-
Durable brass body with nickel-plated finish
-
Triple bearing design: 2x radial, 1x thrust ball bearings
-
O-ring made of NBR (Nitrile Butadiene Rubber) for superior sealing
-
Thread IN: 1/4" NPTF to Thread OUT: 1/4" NPTM
-
Overall diameter: 2.36" | Length: 1.45" | NW: 1/4"
-
Handles pressure up to 4000 PSI
-
Operates at up to 1000 RPM
-
Temperature tolerance: 90°F at 1000 RPM, 250°F at 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 1/4"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.67
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.45
Length 2 (L2): 0.43
Weight: 13.0oz
Showing 330/1547
Next