Products
Sort by:
The Mosmatic DYTI Swivel 59.918 is built for high-pressure rotating cleaning systems. It uses reinforced carbide and stainless steel construction for demanding wash applications. This swivel is suited for self-rotating tools, surface cleaners, and parts washers. It is also used with the Mosmatic Wheelblaster series. The reinforced design helps support thrust and radial force during rotation. It is rated up to 5000 PSI for high-pressure cleaning use. The 1" NPTF to G3/8 M threads fit compatible cleaning equipment.
Specs
Pressure: up to 5000 PSI / approx. 345 bar
RPM: max 2000 RPM
Material Type: Carbide / stainless steel
Temperature 250°F
Design: Reinforced swivel
Thread In: 1" NPTF
Thread Out: G3/8 M
The Mosmatic 59.168 DYU Swivel is a high-performance stainless steel swivel built for ultra-high-pressure cleaning applications involving intense thrust and radial force. Designed for surface cleaners, rotary nozzles, and parts washers, it delivers smooth, powerful rotation under the toughest conditions.
Rated for 7300 PSI, this swivel features a quadruple bearing system - with 2 radial ball bearings and 2 thrust ball bearings - to ensure stable operation at high speed and load. A carbide seal system provides superior protection against leaks, while integrated weep holes offer early detection of seal failure, reducing downtime and maintenance costs.
With a temperature tolerance of 250°F, 2000 RPM capacity, and a compact, corrosion-resistant design, the 59.168 DYU Swivel is built for long-lasting performance in professional and industrial cleaning systems.
Applications
-
High-pressure surface cleaners
-
Industrial parts washing systems
-
Self-rotating rotary nozzles and spray bars
-
Robotic and automated wash equipment
-
Equipment requiring ultra-high pressure and 1/4" flow
Key Features
-
Thread In: 3/8" NPT Female
-
Thread Out: G3/8" Male
-
Material: Stainless steel body and internals
-
Quadruple Bearing System: 2 radial + 2 thrust ball bearings
-
Seal Type: Carbide for high-pressure, high-heat durability
-
Seal Failure Detection: Integrated weep holes
-
Max Pressure: 7300 PSI
-
Max Temperature: 250°F
-
Max RPM: 2000
-
Designed for Longevity: Ideal for high-cycle, continuous-use systems
Specs
Pressure: 7300 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/8" NPTF
Thread Out: G3/8" M
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.63"
Diameter (D): 2.36"
Length 1 (L1): 2.83"
Length 2 (L2): 4.29"
Length 3 (L3): 0.43"
Weight: 50.7 oz
The Mosmatic DYU Swivel 06 90° - 59.916 is a high-RPM stainless steel swivel designed for long-lasting, high-performance use in demanding cleaning environments. It features four reinforced, self-lubricating stainless steel ball bearings for ultra-smooth rotation and stability. The dual spring-based carbide seal system ensures maximum durability and leak prevention under extreme pressure and rotational speeds. With 2x 1/4" NF ports and a G3/8" M thread, this swivel supports up to 7300 PSI, making it ideal for commercial and industrial cleaning applications.
Applications
-
High-speed rotary surface cleaners
-
Car wash and undercarriage systems
-
Industrial pressure washer setups
-
OEM and custom rotating cleaning equipment
Key Features
-
90° stainless steel swivel design
-
4x reinforced self-lubricating ball bearings for smooth, high-speed operation
-
Dual spring-based carbide sealing system for long service life
-
Connections: 2x 1/4" NF ports | G3/8" M thread
-
Rated for up to 7300 PSI
-
Engineered for high-RPM and high-pressure environments
-
Ideal for demanding commercial and industrial applications
Specs
Material Type: Stainless Steel
Pressure: 7300 psi
Thread In: 1/4 NPTF
Thread Out: G3/8" M
The Mosmatic DYW Swivel 55.070 is a premium brass, nickel-plated swivel designed for high-pressure, self-rotating cleaning systems. Engineered for superior performance and durability, this swivel is ideal for demanding cleaning applications such as wall cleaners, parts washers, and other rotating equipment. Featuring a robust triple bearing system and carbide seal, this swivel delivers long-lasting reliability and smooth operation even under high pressure and RPM conditions.
Applications
-
High-pressure rotating cleaning systems
-
Wall cleaners
-
Parts washers
-
Self-rotating cleaning equipment
Features
-
Durable brass body with nickel-plated finish
-
Triple bearing system: 2 radial ball bearings + 1 thrust ball bearing
-
Advanced carbide seal system for extended service life
-
Flange mount for easy and secure installation
-
Thread Inlet: ¼" NPTF
-
Thread Outlet: M12x1 M
-
Overall Diameter: 2.36"
-
Overall Length: 4.21"
-
Nominal Width (NW): ¼"
-
Wrench Size (SW): 0.75"
-
Maximum Pressure: 5000 PSI
-
Maximum RPM: 2000
-
Maximum Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°
RPM: max 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: (G1) ¼" NPTF
Thread Out: (G2) M12x1 M
Nominal Width (NW): ¼"
Wrench Size (SW):0.75
Diameter (D1) (overall diameter): 2.36"
Diameter (D2): 1.10"
Length 1 (L1) (overall length): 2.28"
Length 2 (L2) : 1.04"
Length 3 (L3): 0.35"
Weight: 16.4 oz
The Mosmatic DYW Swivel 55.170 is a high-performance swivel engineered for self-rotating high-pressure applications such as wall cleaners, parts washers, and industrial spray systems. Made from nickel-plated brass with stainless steel inner parts, it offers unmatched durability, smooth rotation, and a long service life.
This model features a triple bearing system - including two radial ball bearings and one thrust bearing - for stability under demanding conditions. The carbide seal system ensures a tight, reliable seal in high-speed or high-temperature operations. Designed for quick and efficient installation, the swivel includes a flange mount and supports up to 5000 PSI, 2000 RPM, and 250°F.
Applications
-
High-pressure wall and surface cleaners
-
Self-rotating nozzles and cleaning tools
-
Parts washers and spray systems
-
Industrial and commercial pressure cleaning setups
-
Equipment requiring precise rotation under pressure
Key Features
-
Thread In: 3/8" NPT Female
-
Thread Out: M12x1 Male
-
Material: Brass body, nickel-plated; stainless steel internal components
-
Triple Bearing System: 2 radial + 1 thrust bearing for smooth performance
-
Seal System: Carbide for high durability
-
High Pressure & RPM Ready: Handles up to 5000 PSI and 2000 RPM
-
Temperature Rating: Up to 250°F
-
Corrosion Resistant: Built for long-term industrial use
-
Flange Included: For fast and stable installation
-
Compact Form: Efficient dimensions for versatile integration
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/8" NPTF
Thread Out: M12x1M
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.87"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.04"
Length 3 (L3): 0.35"
Weight: 16.0 oz
The Mosmatic 55.220 DYW Swivel is a precision-engineered swivel made for high-pressure, self-rotating applications such as wall cleaners, parts washers, and automated spray systems. Constructed from nickel-plated brass with stainless steel internal components, this swivel ensures long-lasting durability in harsh and demanding environments.
Equipped with a triple bearing system - featuring two radial ball bearings and one thrust ball bearing - it delivers smooth, stable rotation under high loads. A carbide seal system provides exceptional sealing capability and extended service life. The integrated flange makes installation fast and secure, while its compact design handles pressures up to 5000 PSI, speeds up to 2000 RPM, and temperatures up to 250°F.
Applications
-
Self-rotating wall and surface cleaning equipment
-
High-pressure parts washers
-
Spray bars and rotary tools
-
Automated cleaning systems
-
Industrial and commercial pressure washing
Key Features
-
Thread In: M21x1.5 Male
-
Thread Out: M12x1 Male
-
Triple Bearing System: 2 radial and 1 thrust ball bearing
-
Seal Type: Carbide for high durability and precision sealing
-
Material: Brass, nickel plated; internal parts in stainless steel
-
High-Speed Capability: Supports up to 2000 RPM
-
High Pressure Performance: Rated for up to 5000 PSI
-
Flange Mount: For quick and stable installation
-
Corrosion Resistant: Built for long-lasting outdoor and chemical use
-
Compact & Lightweight: Ideal for mobile or tight-space systems
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: M21x1.5M
Thread Out: M12x1M
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.75"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.04"
Length 3 (L3): 0.35"
Weight: 15.7 oz
The Mosmatic 55.270 DYW Swivel is a high-performance swivel engineered for high-pressure, self-rotating applications such as wall cleaners, surface tools, and parts washers. Made from nickel-plated brass with stainless steel internal components, this swivel is built to last in demanding commercial and industrial environments.
Designed for smooth and efficient rotation, the unit features a triple bearing system - with two radial ball bearings and one thrust bearing - combined with a carbide seal system for enhanced sealing and extended operational life. A built-in flange ensures fast and stable installation. With support for up to 5000 PSI, 2000 RPM, and 250°F, this swivel delivers performance you can rely on.
Applications
-
Wall and surface cleaners
-
High-pressure parts washers
-
Self-rotating spray arms and nozzles
-
Industrial cleaning tools and systems
-
Automated wash bays and rotary equipment
Key Features
-
Thread In: M22x1.5 Male
-
Thread Out: M12x1 Male
-
Triple Bearing System: 2 radial + 1 thrust bearing for smooth rotation
-
Seal Type: Carbide seal for durability under pressure and temperature
-
Material: Brass, nickel plated; stainless steel internal parts
-
High-Speed & Pressure: Handles up to 2000 RPM and 5000 PSI
-
Heat Resistant: Rated for temperatures up to 250°F
-
Flange Mount: Provides secure, easy installation
-
Corrosion Resistant: Built for wet and chemically aggressive environments
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: M22x1.5M
Thread Out: M12x1M
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.79"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.04"
Length 3 (L3): 0.35"
Weight: 16.0 oz
The Mosmatic EG Nozzle Size 02 is engineered for high-performance cleaning with unmatched precision. Manufactured from hardened stainless steel, this nozzle is designed for durability and optimal flow in high-pressure applications. With a maximum pressure rating of 5000 PSI, it delivers a straight, 0º spray pattern for direct and focused cleaning power. The nozzle is intended for use with the EG Stabilizer Nozzle (sold separately), ensuring accurate alignment and effective operation without the need for threading.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications
-
Industrial surface cleaning
-
Pressure washing systems
-
Vehicle wash bays
-
Construction equipment cleaning
-
Municipal and sanitation services
Features
-
Hardened stainless steel construction for superior durability
-
0º spray angle for concentrated cleaning power
-
Maximum pressure of 5000 PSI
-
Designed for use with EG Stabilizer Nozzle (not included)
-
Available in sizes 2 through 10
-
No threading required
Specs
Material Type: Stainless Steel
Size: 02
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 03 is a high-performance, straight-jet nozzle engineered for powerful, precision cleaning. Made from hardened stainless steel, it offers superior durability and withstands pressures up to 5000 PSI. Specifically designed for use with the Mosmatic EG Stabilizer Nozzle (sold separately), this nozzle is part of a full range of 0º spray angle options, from size 2 to 20. Its no-thread design allows for quick and secure attachment to the EG Stabilizer system.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
Commercial and industrial pressure washing
-
Surface cleaning with Mosmatic surface cleaners
-
High-pressure cleaning in automotive or fleet maintenance
-
Equipment and machinery washdowns
-
Agriculture and food industry sanitation
Features:
-
Compatible with Mosmatic EG Stabilizer Nozzle (no threading required)
-
0º spray angle for concentrated, straight-line spray
-
Max pressure: 5000 PSI per nozzle
-
Made from hardened stainless steel for long-lasting use
-
Available in sizes 2 through 20 for flexible pressure needs
Specs
Material Type: Stainless Steel
Size: 03
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 04 is a premium straight-jet nozzle designed for high-pressure cleaning applications. Constructed from hardened stainless steel, it handles up to 5000 PSI and provides a consistent 0º spray angle for precise, concentrated cleaning. This nozzle is intended for use with the Mosmatic EG Stabilizer Nozzle (not included) and requires no threading for installation. Part of a series available in sizes 2 to 20, the Size 04 nozzle is ideal for tasks that demand accuracy and durability.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
Commercial pressure washing systems
-
Surface cleaners using the EG Stabilizer setup
-
Industrial cleaning of machinery and equipment
-
Vehicle and fleet maintenance
-
Sanitation in food and agricultural environments
Features:
-
0º spray angle for direct, focused cleaning
-
Rated for up to 5000 PSI of pressure
-
Hardened stainless steel for strength and longevity
-
No-thread design; used exclusively with EG Stabilizer Nozzle
-
Available in a full range of sizes from 2 to 20
Specs
Material Type: Stainless Steel
Size: 04
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 05 is a high-performance, straight-jet nozzle engineered for demanding pressure washing applications. Built from durable hardened stainless steel, this nozzle delivers a powerful 0º spray at pressures up to 5000 PSI. Designed to be used with the Mosmatic EG Stabilizer Nozzle (sold separately), it features a no-thread connection for quick, secure installation. Part of Mosmatic’s EG series ranging from size 2 to 20, the Size 05 nozzle is ideal for concentrated cleaning with lasting performance.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
High-pressure surface cleaning systems
-
Industrial machinery and equipment washing
-
Automotive and fleet maintenance
-
Agricultural and food industry sanitation
-
Compatible use with Mosmatic EG Stabilizer Nozzle setups
Features:
-
0º spray angle for precision cleaning
-
Rated for a maximum pressure of 5000 PSI
-
Made from hardened stainless steel for long-lasting use
-
Thread-free design for quick connection to EG Stabilizer Nozzle
-
Available in sizes 2 through 20 to match specific flow needs
Specs
Material Type: Stainless Steel
Size: 05
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 06 is a precision-engineered, high-pressure nozzle crafted from hardened stainless steel for maximum durability and performance. Delivering a powerful 0º straight jet spray, this nozzle handles up to 5000 PSI and is ideal for demanding cleaning applications. It is designed exclusively for use with the Mosmatic EG Stabilizer Nozzle (sold separately), featuring a no-thread connection for fast and secure installation. As part of the EG series, this nozzle is available in sizes 2 to 20 to match various flow requirements.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
Commercial and industrial pressure washing
-
Surface cleaning with Mosmatic EG Stabilizer systems
-
Vehicle and fleet wash operations
-
Equipment and machinery maintenance
-
Cleaning in agriculture, sanitation, and food industries
Features:
-
Delivers a 0º spray angle for focused, high-impact cleaning
-
Supports up to 5000 PSI per nozzle
-
Made from hardened stainless steel for extended durability
-
Threadless design for direct use with Mosmatic EG Stabilizer Nozzle
-
Offered in multiple sizes (2–20) for optimal flow customization
Specs
Material Type: Stainless Steel
Size: 06
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 07 is a high-pressure, stainless steel nozzle designed for precision cleaning tasks. With a 0º spray angle and a pressure rating of up to 5000 PSI, this nozzle delivers a concentrated stream ideal for tough, targeted cleaning. Built from hardened stainless steel for durability and long-term performance, the Size 07 nozzle is part of Mosmatic’s EG series, available in sizes 2 through 20. It’s specifically designed for use with the EG Stabilizer Nozzle (sold separately), eliminating the need for threading.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
High-pressure surface and floor cleaners
-
Industrial and mechanical equipment washing
-
Fleet and vehicle cleaning systems
-
Sanitary cleaning in food and agricultural environments
-
Compatible with Mosmatic EG Stabilizer setups
Features:
-
0º spray angle for precise, direct jet cleaning
-
Rated up to 5000 PSI for high-pressure applications
-
Constructed from hardened stainless steel for durability
-
Threadless design; fits directly into EG Stabilizer Nozzle
-
Available in a full range of sizes from 2 to 20
Specs
Material Type: Stainless Steel
Size: 07
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 08 is a precision-engineered stainless steel high-pressure nozzle designed for demanding cleaning applications. Built to deliver a straight, concentrated spray with a 0º spray angle, this nozzle maximizes cleaning impact without the need for threading—it's designed for use with the Mosmatic EG Stabilizer Nozzle (sold separately). Rated for a maximum pressure of 5000 PSI, the EG Nozzle is part of Mosmatic’s durable line of hardened stainless steel nozzles, available in sizes ranging from 2 to 20, ensuring the right fit for any high-pressure system.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
High-pressure surface cleaning
-
Industrial washdown operations
-
Automatic car wash and vehicle rinsing systems
-
Pressure washing systems using EG Stabilizer Nozzles
Key Features:
-
Hardened stainless steel construction for superior durability
-
0º spray angle for concentrated, straight-line cleaning
-
Designed to be used with Mosmatic EG Stabilizer Nozzle (not included)
-
No threading required for installation
-
Available in sizes 2 to 20 for system compatibility
-
Max Pressure: 5000 PSI for one nozzle
Specs
Material Type: Stainless Steel
Size: 08
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
The Mosmatic EG Nozzle Size 09 is a durable stainless steel high-pressure nozzle designed for maximum cleaning power. Featuring a 0º spray angle for a straight, concentrated stream, it delivers intense cleaning performance without the need for threading. This nozzle is specifically designed for use with the Mosmatic EG Stabilizer Nozzle (sold separately). Built for reliability with a maximum pressure rating of 5000 PSI, the EG Nozzle series is available in sizes 2 through 20, offering versatility across a range of high-pressure cleaning systems.
Size of EG nozzle is determined by the psi (pressure) and GPM (Gallons Per Minute) of your pressure washer.
**See charts for more details on pressure, flow rate, and pump capacity.
Applications:
-
High-pressure industrial cleaning
-
Surface cleaning and preparation
-
Automatic car wash spray systems
-
Pressure washing with EG Stabilizer Nozzles
Key Features:
-
Hardened stainless steel construction for extreme durability
-
0º spray angle for focused, straight-line cleaning
-
Designed for use with Mosmatic EG Stabilizer Nozzle (not included)
-
Threadless design for easy installation
-
Available in sizes 2 to 20 for broad compatibility
-
Max Pressure: 5000 PSI for one nozzle
Specs
Material Type: Stainless Steel
Size: 09
Pressure: 5000 psi (at 1 nozzle, see chart for more details)
Showing 705/1547
Next
