Duct Cleaning Swivels
Sort by:
The Mosmatic DGR Swivel - 34.412 is a stainless steel swivel built to manage both thrust and radial forces in high-pressure environments. Ideal for industrial and food service applications, this swivel features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for maximum rotational stability and performance. Its corrosion-resistant construction and high-flow design make it suitable for harsh, continuous-duty operations involving water, chemicals, or sanitation fluids.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage processing lines
-
Sanitation and washdown equipment
-
Chemical and water transfer operations
Key Features:
-
Corrosion-resistant stainless steel body
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both radial and thrust loads
-
Optimized for high-flow and high-pressure performance
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 5.55"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 3.78
Wrench Size 2 (SW2): 1.42
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.55"
Length 2 (L2): 3.78
Weight: 60oz
The Mosmatic DGR Swivel - 34.212 is a high-performance stainless steel swivel engineered to withstand both thrust and radial forces in high-pressure, high-flow environments. Designed for industrial and food service applications, it features a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for smooth, stable, and long-lasting performance. Its corrosion-resistant construction makes it ideal for use in harsh environments involving water, chemicals, or sanitation processes. With high-flow capacity and robust design, it delivers reliable results in demanding systems.
Applications:
-
High-pressure industrial cleaning systems
-
Food processing and sanitation lines
-
Chemical and fluid transfer systems
-
Automated washdown and spray equipment
Key Features:
-
Heavy-duty stainless steel body for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed for both radial and thrust force applications
-
High-flow capacity for performance-intensive operations
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF
-
Nominal Width (NW): 1/2"
-
Diameter: 1.97"
-
Overall Length: 4.92"
-
Max Pressure: 3000 PSI
-
Max RPM: 200
-
Operating Temperature: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 200
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTF
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.06
Diameter (D): 1.97"
Length 1 (L1) (overall length): 4.92"
Length 2 (L2): 3.43
Weight: 41.0oz
The Mosmatic DGR Swivel - 34.611 is a robust stainless steel swivel designed for high-pressure, high-flow applications requiring both thrust and radial force handling. Built for industrial and food service environments, this swivel features a quadruple bearing system—including two radial and two thrust ball bearings—for optimal rotational performance and durability under load. Its stainless steel construction ensures long-term corrosion resistance, making it ideal for harsh operating conditions involving chemicals, water, or cleaning agents.
Applications:
-
High-pressure industrial fluid systems
-
Food and beverage sanitation and processing lines
-
Chemical transfer and mixing systems
-
High-flow automated washdown and spray equipment
Key Features:
-
Stainless steel body for maximum corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Engineered to handle both radial and thrust forces
-
High-flow capacity for demanding operations
-
Thread IN: 2" NPTF | Thread OUT: 2" NPTM
-
Nominal Width (NW): 2"
-
Diameter: 3.54"
-
Overall Length: 6.54"
-
Max Pressure: 3000 PSI
-
Max RPM: 70
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 70
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 2"NPTF
Thread Out: G2 2"NPTM
Nominal Width (NW): 2"
Wrench Size 1 (SW1): 2.95
Wrench Size 2 (SW2): 2.44
Diameter (D): 3.54"
Length 1 (L1) (overall length): 6.54"
Length 2 (L2): 4.57
Length 3 (L3): 0.87
Weight: 132oz
The Mosmatic DGR Swivel - 34.511 is a heavy-duty stainless steel swivel designed for high-pressure applications where both thrust and radial forces are present. Built for performance in industrial and food service environments, this swivel includes a quadruple bearing system—two radial ball bearings and two thrust ball bearings—for maximum stability and smooth operation under demanding conditions. Its corrosion-resistant stainless steel body supports high flow rates and provides exceptional durability in harsh environments, making it ideal for continuous-duty fluid systems.
Applications:
-
High-pressure industrial fluid handling
-
Food processing and sanitation systems
-
Chemical transfer operations
-
Automated washdown and cleaning systems
Key Features:
-
High-strength stainless steel for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Supports both radial and thrust force applications
-
High-flow design for large-volume operations
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.15"
-
Overall Length: 6.06"
-
Max Pressure: 3000 PSI
-
Max RPM: 100
-
Operating Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 100
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 2.56
Wrench Size 2 (SW2): 2.17
Diameter (D): 3.15"
Length 1 (L1) (overall length): 6.06"
Length 2 (L2): 4.09
Length 3 (L3): 0.79
Weight: 111oz
The Mosmatic DGR Swivel - 34.541 is a premium stainless steel swivel engineered for high-flow, high-pressure applications requiring robust support for both thrust and radial forces. Designed for demanding industrial and food service environments, this swivel includes a quadruple bearing system with two radial ball bearings and two thrust ball bearings for smooth, reliable rotation under load. Its corrosion-resistant stainless steel body ensures long-lasting durability, even in harsh conditions. Optimized for performance and flow efficiency, this swivel is ideal for large-scale fluid handling operations.
Applications:
-
Industrial high-pressure systems
-
Food and beverage processing equipment
-
Chemical transfer and sanitation systems
-
High-flow rotary unions and automated machinery
Key Features:
-
Corrosion-resistant stainless steel construction
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Handles both radial and thrust forces efficiently
-
High-flow design for demanding applications
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 5.57"
-
Max Pressure: 3000 PSI
-
Max RPM: 130
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 2
Wrench Size 2 (SW2): 1.73
Diameter (D): 2.36"
Length 1 (L1) (overall length): 5.57"
Length 2 (L2): 3.98
Length 3 (L3): 0.71
Weight: 62oz
The Mosmatic DGR Swivel - 34.311 is a premium stainless steel swivel designed to withstand both radial and thrust forces in high-pressure applications. Featuring a quadruple bearing system with two radial and two thrust ball bearings, this swivel delivers smooth, reliable performance even under heavy load. It is ideal for industrial or food service use where high flow, corrosion resistance, and durability are essential. Built from high-grade stainless steel, it ensures long-term resistance to harsh environments and demanding conditions.
Applications:
-
Industrial high-pressure systems
-
Food and beverage processing equipment
-
Sanitation and washdown systems
-
Chemical and fluid transfer operations
Key Features:
-
Corrosion-resistant stainless steel construction
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
High-flow design for efficient performance
-
Handles both thrust and radial force loads
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM
-
Nominal Width (NW): 3/4"
-
Diameter: 2.17"
-
Overall Length: 5"
-
Max Pressure: 3000 PSI
-
Max RPM: 150
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 150
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTM
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.65
Wrench Size 2 (SW2): 1.26
Diameter (D): 2.17
Length 1 (L1) (overall length): 5
Length 2 (L2): 3.66
Length 3 (L3): 0.59
Weight: 51oz
The Mosmatic DGR Swivel - 34.211 is a heavy-duty stainless steel swivel designed for high-pressure applications involving both thrust and radial forces. Engineered for durability and performance, this swivel is ideal for industrial and food service environments where high flow and corrosion resistance are essential. It features a robust quadruple bearing system—two radial ball bearings and two thrust ball bearings—for optimal load handling and smooth operation. Its stainless steel construction ensures resistance to harsh chemicals and corrosion, making it a reliable solution for demanding operational conditions.
Applications:
-
Industrial high-pressure systems
-
Food service and sanitation equipment
-
Chemical and fluid transfer systems
-
High-flow rotary connections
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
Quadruple bearing system: 2x radial + 2x thrust ball bearings
-
Designed to handle both thrust and radial forces
-
High-flow performance under continuous pressure
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTM
-
Nominal Width (NW): 1/2"
-
Diameter: 1.97"
-
Overall Length: 4.69"
-
Max Pressure: 3000 PSI
-
Max RPM: 200
-
Temperature Range: 40°F to 180°F
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: 200
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTM
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.06
Diameter (D): 1.97"
Length 1 (L1) (overall length): 4.69"
Length 2 (L2): 3.43"
Length 3 (L3): 0.59"
Weight: 41.0oz
The Mosmatic DGE Swivel - 34.787 is a robust stainless steel swivel engineered for high-pressure and high-flow systems that must reliably manage thrust and radial forces. Designed with a durable bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, long-lasting performance under continuous use. Rated for 2900 PSI and capable of withstanding temperatures up to 250°F, it is perfect for demanding pharmaceutical, food processing, industrial cleaning, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation lines
-
Pharmaceutical clean-in-place (CIP) systems
-
Industrial fluid handling and high-pressure washdowns
-
Rotary spray arms and booms in automatic car washes
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial loads with high stability
-
High-flow performance designed for low-RPM, high-pressure use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 5.87"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTF
Nominal Width (NW): 1 1/2"
Wrench Size (SW1): 2.13
Diameter 1 (D1): 3.33"
Diameter 2 (D2): 3.98
Length 1 (L1) (overall length): 5.87"
Length 2 (L2): 3.17
Length 4 (L4): 1.66
Length 5 (L5): 1.42
Weight: 181.5oz
The Mosmatic DGE Swivel - 34.786 is a high-performance stainless steel swivel engineered for high-pressure applications that demand reliable management of thrust and radial forces. Equipped with a reliable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent operation even in the most demanding conditions. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is an ideal choice for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems.
Applications:
-
Food and beverage sanitation and processing systems
-
Pharmaceutical clean-in-place (CIP) applications
-
Industrial washdown and fluid transfer
-
Rotary spray systems in automatic car washes
Key Features:
-
Durable stainless steel construction for maximum corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports high-flow, low-RPM, high-pressure applications
-
Designed to handle both thrust and radial loads efficiently
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.37"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTF
Nominal Width (NW): 1 1/4"
Wrench Size (SW1): 1.97
Diameter 1 (D1): 2.76"
Diameter 2 (D2): 3.07
Length 1 (L1) (overall length): 5.37"
Length 2 (L2): 2.84
Length 4 (L4): 1.18
Length 5 (L5): 1.30
Weight: 94.7oz
The Mosmatic DGE Swivel - 34.785 is a durable stainless steel swivel engineered for high-pressure environments requiring precise management of thrust and radial forces. Featuring a reliable bearing system with 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth operation under continuous use. Designed for a max pressure of 2900 PSI and temperature resistance up to 250°F, it is the ideal solution for pharmaceutical, food processing, industrial, and automatic car wash applications.
Applications:
-
Food and beverage production and sanitation systems
-
Pharmaceutical clean-in-place (CIP) and processing lines
-
Industrial washdown and chemical distribution
-
Rotary spray arms in automatic car washes
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Engineered to handle both thrust and radial loads
-
High-flow performance designed for low-RPM applications
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.35"
-
Overall Length: 4.65"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size (SW1): 1.42
Diameter 1 (D1): 2.35"
Diameter 2 (D2): 2.83
Length 1 (L1) (overall length): 4.65"
Length 2 (L2): 2.52
Length 4 (L4): 1.18
Length 5 (L5): 1.14
Weight: 74.3oz
The Mosmatic DGE Swivel - 34.780 is a robust stainless steel swivel designed for high-pressure applications involving both thrust and radial forces. Built for durability and precision, this swivel features a robust bearing system that includes 1x thrust ball bearing and 2x sliding bearings, ensuring smooth, long-lasting performance. With a pressure rating of 5000 PSI and temperature resistance up to 250°F, it is ideal for continuous operation in pharmaceutical, food service, industrial, and automatic car wash environments.
Applications:
-
Food and beverage production and sanitation
-
Clean-in-place (CIP) systems in pharmaceutical facilities
-
Industrial washdown and chemical processing
-
Rotary arms and sprayers in automatic car wash systems
Key Features:
-
Heavy-duty stainless steel body for corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Designed to support both thrust and radial load applications
-
High-flow, low-RPM swivel for continuous-duty use
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF
-
Nominal Width (NW): 3/4"
-
Diameter: 1.97"
-
Overall Length: 4.35"
-
Max Pressure: 5000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTF
Nominal Width (NW): 3/4"
Wrench Size (SW1): 1.26
Diameter 1 (D1): 1.97"
Diameter 2 (D2): 1.97
Length 1 (L1) (overall length): 4.35"
Length 2 (L2): 2.40
Length 4 (L4): 0.75
Length 5 (L5): 0.87
Weight: 36.0oz
The Mosmatic DGE Swivel - 34.777 is a heavy-duty stainless steel swivel engineered for high-pressure operations where managing thrust and radial forces is essential. Featuring a durable bearing system—with 1x thrust ball bearing and 2x sliding bearings—this swivel ensures long-lasting, smooth rotation under continuous load. Corrosion-resistant and built for high-flow performance, it is ideal for demanding pharmaceutical, food service, industrial, and automatic car wash applications. Rated for up to 2900 PSI and 250°F, it delivers outstanding reliability in harsh environments.
Applications:
-
Food and beverage processing and sanitation systems
-
Pharmaceutical manufacturing and CIP systems
-
Industrial high-pressure cleaning and fluid transfer
-
Automatic car wash rotary spray arms
Key Features:
-
Robust stainless steel construction for maximum corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Smooth low-RPM operation handling both thrust and radial forces
-
High-flow capacity ideal for continuous-use applications
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 6.12"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size (SW1): 1.97
Diameter 1 (D1): 3.33"
Diameter 2 (D2): 3.98
Length 1 (L1) (overall length): 6.12"
Length 2 (L2): 3.17
Length 3 (L3): 0.79
Length 4 (L4): 1.42
Length 5 (L5): 1.42
Weight: 182.9oz
The Mosmatic DGE Swivel - 34.776 is a high-performance stainless steel swivel engineered for high-pressure applications requiring dependable rotation under thrust and radial forces. Designed with a durable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel provides smooth, reliable operation in continuous-duty cycles. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is corrosion resistant and ideal for use in pharmaceutical, food processing, automatic car washes, and industrial fluid systems.
Applications:
-
Food and beverage sanitation and fluid transfer systems
-
Pharmaceutical manufacturing and CIP applications
-
Industrial high-pressure washdown and rinsing stations
-
Rotary spray systems in automatic car wash setups
Key Features:
-
Stainless steel construction for excellent corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Designed to handle both thrust and radial loads
-
Supports high-flow, low-RPM applications
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.65"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi Temperature: 250°F RPM: Max. 30 Material Type: Stainless Steel Inner Part: Stainless Steel Seal: O-ring NBR Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi) Thread In: G1 1 1/4"NPTF Thread Out: G2 1 1/4"NPTM Nominal Width (NW): 1 1/4" Wrench Size (SW1): 1.47 Diameter 1 (D1): 2.76" Diameter 2 (D2): 3.07 Length 1 (L1) (overall length): 5.65" Length 2 (L2): 2.84 Length 3 (L3): 0.79 Length 4 (L4): 1.18 Length 5 (L5): 1.30 Weight: 92.5oz
The Mosmatic DGE Swivel - 34.775 is a robust stainless steel swivel designed for high-pressure applications that demand durability, hygiene, and smooth rotation. Built to withstand both thrust and radial forces, it features a precision-engineered bearing system consisting of 1x thrust ball bearing and 2x sliding bearings. This swivel is corrosion resistant and built for continuous use in pharmaceutical, food service, automatic car wash, and industrial cleaning systems. With a pressure rating of 2900 PSI and a max temperature of 250°F, it delivers long-term, high-flow performance.
Applications:
-
Food and beverage processing and sanitation
-
Pharmaceutical clean-in-place (CIP) systems
-
Industrial washdown and chemical handling
-
Rotary spray assemblies in automatic car washes
Key Features:
-
Stainless steel body for superior corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial loads in high-pressure use
-
Designed for high-flow, low-RPM environments
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTM
-
Nominal Width (NW): 1"
-
Diameter: 2.35"
-
Overall Length: 4.84"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTM
Nominal Width (NW): 1"
Wrench Size (SW1): 1.42
Diameter 1 (D1): 2.35"
Diameter 2 (D2): 2.83
Length 1 (L1) (overall length): 4.84"
Length 2 (L2): 2.52
Length 3 (L3): 0.71
Length 4 (L4): 1.18
Length 5 (L5): 1.14
Weight: 77.1oz
The Mosmatic DGE Swivel - 34.774 is a durable, high-performance stainless steel swivel designed for high-pressure, high-flow systems requiring reliable handling of both thrust and radial forces. Built with a robust bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent rotation even under demanding continuous use. With a pressure rating of 5000 PSI and temperature tolerance up to 250°F, it’s ideal for pharmaceutical, food service, automatic car wash, and industrial cleaning applications.
Applications:
-
Food and beverage production and sanitation systems
-
Pharmaceutical clean-in-place (CIP) operations
-
High-pressure washdown and fluid systems in industry
-
Rotary spray systems in automatic car washes
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Manages both thrust and radial forces under high pressure
-
Smooth low-RPM operation with high-flow efficiency
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM
-
Nominal Width (NW): 3/4"
-
Diameter: 1.97"
-
Overall Length: 4.35"
-
Max Pressure: 5000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTM
Nominal Width (NW): 3/4"
Wrench Size (SW1): 1.06
Diameter 1 (D1): 1.97"
Diameter 2 (D2): 1.97
Length 1 (L1) (overall length): 4.35"
Length 2 (L2): 2.40
Length 3 (L3): 0.63
Length 4 (L4): 0.75
Length 5 (L5): 0.87
Weight: 35.7oz
Showing 90/104
Next