Find a Swivel

The Mosmatic DGS Swivel 30.014 is a brass, nickel-plated swivel built for performance in high and low-pressure cleaning systems, hose connections, hydraulic applications, and ceiling booms. Designed for reliability under demanding conditions, this swivel offers smooth, low-torque rotation, even at maximum pressure.

Equipped with sealed stainless steel bearings—1x thrust and 1x radial—and an O-ring NBR seal system (optional EPDM or FKM), the DGS 30.014 is fully maintenance-free, providing long-lasting operation and corrosion resistance in tough environments.

Applications

• High and low-pressure hose connections

• Ceiling booms and wall booms

• Hydraulic rotary joints

• Industrial and commercial cleaning equipment

• Hose reel swivel assemblies

Key Features

• Model: Mosmatic DGS 30.014

• Material: Brass, nickel-plated

• Thread IN (G1): G1/4" Female

• Thread OUT (G2): 3/8" NPTF

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust ball bearing, 1x radial ball bearing

• Low Torque: Easy rotation at max pressure

• Maintenance-Free: Sealed stainless steel bearings

• Overall Diameter: 0.86"

• Overall Length: 2.63"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.75"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 G1/4" F

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.75"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.63"

Diameter (D) (overall diameter): 0.86"

Weight: 5.5 oz

The Mosmatic DKS Swivel Coupling 70.151 is a high-performance, nickel-plated brass swivel engineered for high-pressure cleaning systems and industrial hose applications. Designed to deliver reliable, leak-free performance under demanding conditions, this swivel features a robust ceramic seal system and a single thrust ball bearing for smooth rotational operation.

The integrated flange allows for quick and secure installation, while built-in weep holes provide a visible warning in the event of seal failure—helping to reduce downtime and maintenance costs. The coupling features a Quick Connect Thread In of M22x1.5 F and a Thread Out of ¼" NPTM, offering wide compatibility with standard hose and equipment fittings.

With a pressure rating up to 3600 PSI, a maximum temperature tolerance of 250°F, and support for pH 3–12 media and 10-micron filtered compressed air (290 PSI), the DKS 70.151 is ideal for use in professional-grade cleaning and connection systems.

Applications

• High-pressure cleaning and spraying systems

• Industrial and commercial hose assemblies

• Quick-connect setups for pressure washers

• Surface cleaning tools and rotary nozzles

• Pneumatic tool connections

• Car wash installations and maintenance equipment

Features

• Nickel-plated brass for corrosion resistance and durability

• Ceramic seal system for long-term performance

• Smooth rotation with single thrust ball bearing

• Flanged design for simple installation

• Built-in weep holes indicate seal failure

• Thread In: M22x1.5 F | Thread Out: ¼" NPTM

• Nominal Width (NW): ¼"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Dimensions: 1.34" diameter | 1.76" overall length

• Suitable for pH 3–12 media and 10-micron filtered air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Thread Out: G2 1/4"NPTM

Nominal Width (NW): ¼"

Wrench Size 1 (SW1): 0.67"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 1.76

Length 2 (L2): 0.43

Weight: 3.7 oz

The Mosmatic DGS Swivel 30.154 is a precision-engineered brass, nickel-plated swivel designed for high and low-pressure cleaning systems, hydraulic hose connections, ceiling booms, and other demanding industrial applications. Built for durability and ease of use, this swivel features sealed stainless steel bearings and a low torque design to ensure effortless rotation under maximum pressure.

A dual bearing configuration—1x thrust and 1x radial ball bearing—combined with an O-ring NBR seal system (optional EPDM or FKM), makes it an ideal maintenance-free solution for continuous use in tough environments.

Applications

• High and low pressure cleaning systems

• Hydraulic and pneumatic hose connections

• Ceiling boom installations

• Industrial and commercial wash systems

• Hose reels and fluid transfer systems

Key Features

• Model: Mosmatic DGS 30.154

• Material: Brass, nickel plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTF

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust, 1x radial ball bearing

• Very Low Torque: Ensures smooth operation

• Stainless Steel Bearings: Sealed, corrosion-resistant

• Overall Diameter: 0.98"

• Overall Length: 2.63"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.63"

Diameter (D) (overall diameter): 0.98"

Weight: 5.6 oz

The Mosmatic DGVI Swivel 32.769 is a premium stainless steel swivel connector designed for high-pressure hose reels, HP-Guns, and hydraulic systems. It features 3/8" NPTF inlet and outlet ports with a single thrust ball bearing, enabling smooth live rotation under maximum pressure.

Crafted with robust stainless steel, this swivel ensures superior corrosion resistance, low maintenance, and long-lasting performance in demanding environments. Ideal for tangle-free hose operations in pressure washing and hydraulic applications.

Applications

• High-pressure hose reels

• Hydraulic systems

• HP-Guns and pressure washers

• Commercial cleaning equipment

• Tangle-free hose installations

Features

• Material: Full stainless steel construction

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTF

• Overall Length: 2.87"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Max Pressure: 7300 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Bearing System: 1x thrust ball bearing

• Seal System: O-ring NBR (optional EPDM or FKM)

• Performance: Live rotation, zero maintenance, corrosion resistant

Specs 

Pressure: 7300 psi (50 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Stainless steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.87"

Weight: 7.1 oz

The Mosmatic 32.910 DGVI Swivel is a high-quality swivel joint designed to maximize flexibility and reduce hose strain in paint spray guns, HP-guns, and other multi-directional applications. Made from brass, nickel-plated components, and stainless steel, this swivel offers outstanding durability and performance in high-pressure environments.

This model features a 1/8" NPTF inlet, 1/8" NPTM outlet, and a nominal width of 1/4", with a total length of 4.17". It includes a single thrust ball bearing, a reinforced inner shaft, and a maintenance-free design. The integrated NBR O-ring seal system (optional EPDM or FKM) provides leak-free operation under pressure. With a 4000 PSI rating, support for 30 RPM, and a maximum temperature of 250°F, this swivel ensures smooth, unrestricted motion where it’s needed most.

Applications

• Paint spray guns and airless paint systems

• High-pressure guns and hose connections

• Multi-directional hose routing

• Automotive, industrial, and surface coating equipment

• Pressure cleaning systems requiring hose maneuverability

Key Features

• Thread Inlet: 1/8" NPTF | Thread Outlet: 1/8" NPTM

• Overall Length: 4.17" | Nominal Width: 1/4"

• Made from brass, nickel-plated components, and stainless steel

• 360° swivel articulation for enhanced mobility

• Thrust ball bearing system ensures smooth operation

• Includes NBR O-ring seal system (EPDM/FKM optional)

• Maintenance-free with reinforced inner shaft

• Rated to 4000 PSI, 30 RPM, and 250°F

Specs 

Pressure: 4000 psi 

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated, Stainless Steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread IN: 1/8"NPTF

Thread OUT: 1/8"M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.75

Wrench Size 2 (SW2): 0.40

Length 1 (L1) (overall length) : 4.17

Length 2 (L2): 0.60

Length 3 (L3): 2.00

Weight: 13.8 oz

The Mosmatic DGS Swivel 30.653 is a high-performance brass, nickel-plated swivel engineered for high and low pressure cleaning systems, hose connections, ceiling booms, and hydraulic applications. Designed for durability and smooth, low-torque rotation, this swivel is an ideal solution for heavy-duty cleaning and fluid handling setups.

Built with sealed stainless steel bearings—including one thrust and one radial ball bearing—the DGS 30.653 delivers reliable, maintenance-free operation. Its O-ring NBR seal system ensures consistent sealing under pressure, with optional EPDM or FKM seals available for specialized applications.

Applications

• Pressure washing and hose connections

• Ceiling and wall-mounted boom systems

• Hydraulic rotary applications

• Car wash equipment

• Hose reels and swiveling assemblies

Key Features

• Model: Mosmatic DGS 30.653

• Material: Brass, nickel-plated

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust and 1x radial ball bearing

• Low Torque: Easy rotation at high pressure

• Maintenance-Free: Sealed stainless steel bearings

• Overall Diameter: 0.98"

• Overall Length: 2.43"

• Nominal Width (NW): 3/8"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 3/8"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.43"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.98"

Weight: 6.0 oz

The Mosmatic DKS Swivel Coupling 70.054 is a professional-grade, high-pressure swivel engineered for hose connections, quick coupling systems, and cleaning equipment. Constructed from nickel-plated brass, this swivel is built to resist corrosion and deliver long-lasting, dependable performance in industrial environments.

It features a single thrust ball bearing and a high-performance ceramic seal system for smooth rotation and effective sealing under high pressure. A flange design allows for quick and secure installation, while integrated weep holes provide an early warning of seal wear or failure to support proactive maintenance.

This model includes a Quick Connect Thread In of M21x1.5 F and a Thread Out of 3/8" NPTF, with a nominal width of ¼". Designed to handle up to 3600 PSI, 30 RPM, and 250°F, the 70.054 swivel supports media within a pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• High-pressure hose and cleaning equipment

• Quick connect couplings in industrial systems

• Surface cleaners and rotating spray nozzles

• Car wash equipment and maintenance setups

• Pneumatic tool and compressed air systems

• Commercial and industrial pressure washing

Features

• Corrosion-resistant nickel-plated brass body

• Long-life ceramic seal system

• Single thrust ball bearing for smooth operation

• Flange design for easy, stable installation

• Weep holes for seal failure indication

• Thread In: M21x1.5 F | Thread Out: 3/8" NPTF

• Nominal Width (NW): ¼"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Overall Diameter: 1.34" | Length: 2.08"

• Compatible with pH 3–12 media and 10-micron filtered air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M21X1.5F

Thread Out: G2 3/8"NPTF

Nominal Width (NW): ¼"

Wrench Size 1 (SW1): 0.87"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.08

Length 2 (L2): 

Weight: 3.6 oz

The Mosmatic DKS 90° Swivel Coupling 70.582 is a high-quality, right-angle swivel designed for high-pressure cleaning, hose connections, and quick coupling applications where space-saving flexibility is essential. Constructed from nickel-plated brass, this swivel offers exceptional durability, corrosion resistance, and reliable performance in industrial and commercial environments.

This 90-degree swivel features a single thrust ball bearing for smooth rotational movement and an advanced ceramic seal system to ensure long-lasting, leak-free operation. Its flanged design allows for easy and secure installation, while integrated weep holes provide early visual indication of seal failure, promoting proactive maintenance.

The 70.582 model is equipped with a Quick Connect Thread In of M22x1.5F, a nominal width (NW) of 7/32", and supports high-pressure systems up to 3600 PSI. It operates effectively at a maximum temperature of 250°F and a rotational speed of up to 30 RPM. Compatible with a range of media, including pH 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• High-pressure hose connections in tight or angled spaces

• Industrial and commercial cleaning systems

• Quick-connect pressure washer fittings

• Rotary surface cleaners and spray tools

• Pneumatic and compressed air tool systems

• Car wash installations and detailing setups

Features

• Durable nickel-plated brass construction for corrosion resistance

• 90° swivel design for optimal flexibility in limited spaces

• Smooth rotation with single thrust ball bearing

• Long-lasting ceramic seal system for leak protection

• Flanged design for easy and secure installation

• Seal failure warning through integrated weep holes

• Thread In: M22x1.5F

• Nominal Width (NW): 7/32"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Overall Diameter: 1.34" | Overall Length: 1.97"

• Suitable for pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Nominal Width (NW): 7/32"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 1.97

Weight: 5.7 oz

The Mosmatic 32.915 DGVI Swivel is a precision-engineered swivel designed to improve hose mobility and reduce operator fatigue in paint spray guns, HP-guns, and multi-directional cleaning systems. Built from brass, nickel-plated components, and stainless steel, it ensures high durability and consistent performance in high-pressure environments.

This swivel features a 1/4" NPTF inlet, 1/4" NPTM outlet, a nominal width of 1/4", and an overall length of 4.45". It includes a single thrust ball bearing, a reinforced inner shaft, and is maintenance-free for extended reliability. The integrated NBR O-ring seal (with optional EPDM or FKM) delivers leak-free operation. Rated up to 4000 PSI, 30 RPM, and 250°F, this swivel is ideal for heavy-duty, multi-angle usage.

Applications

• Paint spray guns and industrial coating systems

• HP-guns for pressure washing

• Multi-directional hose assemblies

• Automotive, marine, and industrial cleaning setups

• High-pressure fluid delivery systems requiring flexibility

Key Features

• Thread Inlet: 1/4" NPTF | Thread Outlet: 1/4" NPTM

• Overall Length: 4.45" | Nominal Width: 1/4"

• Made from brass, nickel-plated components, and stainless steel

• 360° swivel articulation for full-range hose mobility

• Single thrust ball bearing for smooth rotation

• Reinforced inner shaft for added strength

• Maintenance-free design for long-term performance

• NBR O-ring seal (EPDM/FKM optional)

• Rated up to 4000 PSI, 30 RPM, and 250°F

Specs 

Pressure: 4000 psi 

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated, Stainless Steel

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread IN: 1/4"NPTF

Thread OUT: 1/4"M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.75

Wrench Size 2 (SW2): 0.67

Length 1 (L1) (overall length) : 4.45

Length 2 (L2): 0.90

Length 3 (L3): 2.00

Weight: 15.0 oz

The Mosmatic DGS Swivel 30.052 is a brass, nickel-plated swivel engineered for performance in high and low pressure cleaning systems, hydraulic hose connections, and ceiling boom setups. With a compact and durable design, it ensures smooth rotation under high pressure, thanks to its low-torque, sealed stainless steel bearing system.

This swivel includes 1x radial ball bearing and 1x thrust ball bearing, supported by a reliable O-ring NBR seal system (with optional EPDM or FKM for customized sealing). Built for easy integration and long-term reliability, it offers maintenance-free operation and superior corrosion resistance.

Applications

• Pressure washing systems

• Hydraulic hose assemblies

• Ceiling and wall-mounted boom arms

• Industrial and commercial hose connections

• Water and chemical transfer lines

Key Features

• Model: Mosmatic DGS 30.052

• Material: Brass, nickel-plated

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 1/4" NPTF

• Seal System: O-ring NBR (Optional: EPDM or FKM)

• Bearings: 1x thrust and 1x radial ball bearing

• Low Torque Design: Smooth rotation at max pressure

• Maintenance-Free: Sealed stainless steel bearings

• Corrosion Resistant: Built for harsh environments

• Overall Diameter: 0.86"

• Overall Length: 2.52"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.75"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 1/4" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.75"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.52"

Diameter (D) (overall diameter): 0.86"

Weight: 4.9 oz

The Mosmatic DGV Swivel 32.554 is a high-performance brass, nickel-plated swivel engineered for high-pressure guns, hose connections, and hydraulic systems. Designed for tangle-free operation and live rotation under full pressure, it features a compact, robust construction. This swivel includes a single thrust ball bearing and an O-ring NBR seal system (optional EBDM or FKM) for long-lasting sealing performance. It is corrosion resistant, maintenance free, and ideal for a wide range of industrial and commercial applications.

Applications

• High-pressure HP-Guns

• Hose connections and reel systems

• Hydraulic and pneumatic systems

• Car washes and cleaning systems

Features

• Material: Brass, nickel-plated

• Thread IN (G1): 1/4" NPTM

• Thread OUT (G2): 3/8" NPTF

• Overall Length: 2.71"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.94"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

• Seal System: O-ring NBR (optional EBDM or FKM)

• Bearing Type: 1x thrust ball bearing

• Key Benefits: Maintenance free, compact design, corrosion resistant

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTM

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.94"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.71"

Length 2 (L2): 0.39"

Weight: 5.6 oz

The Mosmatic DGS Swivel 30.053 is a durable brass, nickel-plated swivel engineered for high and low-pressure cleaning systems, hydraulic applications, and hose reel connections. This precision swivel ensures low-torque rotation under full pressure, making it ideal for both stationary and mobile cleaning setups.

Featuring a dual-bearing system—including one radial and one thrust ball bearing—it offers smooth rotation, extended service life, and sealed stainless steel components that require no maintenance. The integrated O-ring NBR seal system (with optional EPDM or FKM upgrades) delivers superior sealing performance, even in harsh environments.

Applications

• Pressure washer hose connections

• Ceiling and wall booms

• Hydraulic and fluid transfer systems

• Car wash and commercial cleaning equipment

• High-pressure hose reels

Key Features

• Model: Mosmatic DGS 30.053

• Material: Brass, nickel-plated

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 3/8" NPTM

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: 1x thrust + 1x radial ball bearing

• Low Torque: Smooth and efficient under pressure

• Maintenance-Free: Sealed stainless steel bearings

• Overall Diameter: 0.86"

• Overall Length: 2.36"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.75"

• Max Pressure: 4000 PSI

• Max RPM: 30

• Max Temperature: 250°F

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 250°F

RPM: max 30 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.75"

Wrench Size 2 (SW2): 0.75"

Length 1 (L1) (overall length) : 2.36"

Length 2 (L2): 0.47"

Diameter (D) (overall diameter): 0.86"

Weight: 4.6 oz

The Mosmatic DKS Swivel Coupling 70.132 is a precision-engineered, high-pressure swivel coupling designed for hose connections, cleaning systems, and quick coupling applications. Manufactured from nickel-plated brass, this swivel provides superior corrosion resistance and long-lasting performance in industrial and commercial environments.

The unit features a single thrust ball bearing and an advanced ceramic seal system, ensuring smooth rotation and effective sealing even under high-pressure conditions. The integrated flange offers easy, secure installation, while built-in weep holes serve as an early warning system for seal failure, helping to maintain operational efficiency.

This model includes a Quick Connect Thread In of M22x1.5F, with a nominal width (NW) of 7/32", an overall diameter of 1.34", and a length of 2.34". Rated for up to 3600 PSI, with a maximum temperature of 250°F and a maximum speed of 30 RPM, the DKS 70.132 is suitable for media within a pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• Industrial high-pressure cleaning systems

• Hose connection assemblies and quick coupling setups

• Surface cleaners and rotating spray tools

• Car wash systems and detailing equipment

• Pneumatic tool connections and compressed air lines

• Pressure washing accessories in commercial environments

Features

• Heavy-duty nickel-plated brass construction for corrosion resistance

• Long-life ceramic seal system for reliable sealing performance

• Smooth rotation with single thrust ball bearing

• Easy, stable installation with integrated flange design

• Seal failure warning through weep holes for proactive maintenance

• Thread In: M22x1.5F

• Nominal Width (NW): 7/32"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Overall Diameter: 1.34" | Overall Length: 2.34"

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Nominal Width (NW): 7/32"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.34

Weight: 3.0 oz

The Mosmatic DKS Swivel Coupling 70.139 is a high-performance, nickel-plated brass swivel coupling designed for high-pressure cleaning, hose connections, and quick coupling applications. Built for reliability and efficiency, this swivel delivers superior corrosion resistance and smooth rotational function, making it ideal for industrial and commercial environments.

The swivel features a single thrust ball bearing and a precision-engineered ceramic seal system for leak-free operation and extended service life. A flanged design ensures easy and secure installation, while integrated weep holes act as an early warning system for seal failure, helping to prevent unexpected downtime.

With a Quick Connect Thread In of M22x1.5F and a Nominal Width (NW) of ¼", this swivel coupling supports high-pressure systems up to 3600 PSI, operating at temperatures up to 250°F and a maximum speed of 30 RPM. Suitable for media with a pH range of 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• High-pressure hose assemblies

• Industrial cleaning and spraying systems

• Quick-connect setups for pressure washers

• Rotary nozzles and surface cleaning tools

• Car wash equipment and detailing systems

• Pneumatic and compressed air tool connections

Features

• Durable nickel-plated brass construction for corrosion resistance

• Advanced ceramic seal system for long-lasting performance

• Single thrust ball bearing for smooth, reliable rotation

• Flanged design for easy and stable installation

• Integrated weep holes for early seal failure detection

• Thread In: M22x1.5F

• Nominal Width (NW): ¼"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Dimensions: 1.34" overall diameter | 2.42" overall length

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Nominal Width (NW): ¼"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.42

Weight: 3.0 oz

The Mosmatic DKS Swivel Coupling 70.131 is a high-precision, nickel-plated brass swivel designed for high-pressure cleaning systems, hose connections, and quick-coupling applications. With a compact build and premium materials, it ensures exceptional durability and resistance to corrosion in industrial and commercial environments.

This model includes a single thrust ball bearing and a ceramic seal system, providing smooth rotation and long-term leak protection under pressure. The integrated flange design simplifies installation, while built-in weep holes serve as a seal failure warning system to support preventative maintenance.

With a Quick Connect Thread In of M22x1.5F, a nominal width (NW) of 1/8", and an overall length of 2.26", this swivel is rated for up to 3600 PSI and operates at temperatures up to 250°F. It's compatible with a broad range of media, including pH 3–12 and 10-micron filtered compressed air up to 290 PSI.

Applications

• Compact high-pressure cleaning equipment

• Industrial hose and fitting systems

• Surface cleaners and small rotating nozzles

• Precision pneumatic tools and compressed air lines

• Car wash accessories and detailing systems

• Quick-connect hose setups in commercial environments

Key Features

• Durable, corrosion-resistant nickel-plated brass construction

• Single thrust ball bearing for smooth rotational movement

• Advanced ceramic seal system for reliable sealing

• Integrated flange for fast and secure installation

• Weep holes for visual seal failure indication

• Thread In: M22x1.5F

• Nominal Width (NW): 1/8"

• Max Pressure: 3600 PSI

• Max Temperature: 250°F

• Max RPM: 30

• Overall Diameter: 1.34" | Overall Length: 2.26"

• Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)

Specs

Pressure: 3600 psi

Temperature: 250°

RPM: max 30 rpm

Material Type: Brass, nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR

Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)

Thread In: G1 M22X1.5F

Nominal Width (NW): 1⁄8"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.26

Length 2 (L2): 

Weight: 2.8 oz