Hoses, Reels and Fluid Handling Swivels
Sort by:
The Mosmatic 55.153 DYCI Swivel is a high-performance swivel designed for high-flow, high-pressure, self-rotating applications such as surface cleaners, spray bars, and parts washers. Crafted from stainless steel, it offers exceptional durability, chemical resistance, and smooth rotation in demanding environments.
This swivel features a triple bearing system - including two radial ball bearings and one thrust ball bearing - that ensures consistent rotational performance, even under extreme pressure and speed. A carbide seal system provides long-lasting leak protection, while integrated weep holes offer early seal failure detection, helping you maintain system integrity and avoid downtime.
Applications
-
Commercial and industrial surface cleaners
-
Parts washing equipment
-
Rotating high-pressure cleaning systems
-
Spray bars and automated cleaning tools
-
Equipment operating in corrosive or high-temperature environments
Key Features
-
Thread In: 3/8" NPT Female
-
Thread Out: 3/8" NPT Male
-
Material: Full stainless steel body and internal components
-
Triple Bearing System: 2 radial + 1 thrust bearing for smooth rotation
-
Seal Type: Carbide for high durability
-
Weep Holes: Allow early detection of seal failure
-
Max Pressure: 5000 PSI
-
Temperature Tolerance: Up to 250°F
-
High-Speed Rated: Handles up to 2000 RPM
-
Efficient Design: Compact size and dual wrench flats for easy installation
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: max 2,000 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: Carbide
Throughput/medium: ph 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: 3/8" NPTF
Thread Out: 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size (SW1): 0.87"
Wrench Size (SW2): 0.63"
Diameter (D1): 2.36"
Diameter (D2): 1.10"
Length 1 (L1): 2.28"
Length 2 (L2): 1.46"
Length 3 (L3): 0.43"
Length 4 (L4): 0.12"
Weight: 23.0 oz
The Mosmatic WDB Swivel 43.905 is a compact, precision-engineered swivel crafted for high-pressure applications in commercial and industrial settings. Built from nickel-plated brass for exceptional corrosion resistance and longevity, this swivel features a sliding bearing for smooth operation under load. The integrated O-ring NBR seal ensures dependable leak prevention. Designed with ⅛" NPTF inlet and outlet ports, it delivers reliable performance in tight spaces, supporting up to 4000 psi, 30 RPM, and 250°F, making it a go-to component for smaller high-pressure systems.
Applications
-
Compact high-pressure hose reels
-
Ceiling booms in detailing bays or garages
-
Pressure washing equipment
-
Small-scale car wash and industrial cleaning systems
-
OEM applications requiring tight-space swivel integration
Key Features
-
Nickel-plated brass construction for durability and corrosion resistance
-
Sliding bearing for controlled, smooth rotational movement
-
Thread IN: 1/8" NPTF | Thread OUT: 1/8" NPTF
-
Compact profile: Height – 1.06" | Overall Length – 0.87"
-
Nominal Width (NW): 1/4"
-
Handles working pressures up to 4000 psi
-
Temperature tolerance up to 250°F
-
Supports rotational speeds up to 30 RPM
-
Equipped with a reliable O-ring NBR seal for leak-free performance
Specs
Pressure: 4000 psi
Temperature: 250°
RPM: 30
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/8" NPTF
Thread Out: G2 1/8" NPTF
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.87
Height (H): 1.06
Length 1 (L1) :1.77
Length 2 (L2) (overall length): 0.87
Length 3 (L3): 1.14
Length 4 (L4): 0.62
Weight:10.0 oz
The Mosmatic DGVI Swivel 32.894 is a robust, stainless steel swivel engineered for high-pressure hose reels, hydraulic systems, and HP-Guns. With a thread IN of 1/2" NPTM and thread OUT of 1/2" NPTF, it enables live rotation under full pressure, improving equipment longevity and operator control.
Built with a single thrust ball bearing and an NBR O-ring seal system (optional EPDM or FKM), the 32.894 offers reliable performance and low maintenance in demanding applications. Its stainless steel construction ensures long-term resistance to corrosion.
Applications
-
HP-Guns and pressure washers
-
High-pressure hose reels
-
Industrial hydraulics
-
Tangle-free hose systems
-
Commercial washdown equipment
Features
-
Material: 100% Stainless Steel
-
Thread IN (G1): 1/2" NPTM
-
Thread OUT (G2): 1/2" NPTF
-
Overall Length: 2.95"
-
Nominal Width (NW): 3/8"
-
Wrench Size (SW): 1.06"
-
Max Pressure: 7300 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
-
Bearings: 1x thrust ball bearing
-
Seal System: O-ring NBR (optional EPDM/FKM)
-
Performance: Live rotation, corrosion-resistant, maintenance-free design
Specs
Pressure: 7300 psi (50 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2" NPTM
Thread Out: G2 1/2" NPTF
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 1.06"
Wrench Size 2 (SW2): 1.06"
Length 1 (L1) (overall length) : 2.95"
Length 2 (L2): 0.59"
Weight: 8.8 oz
The Mosmatic DGS Swivel 30.654 is a high-quality brass, nickel-plated swivel engineered for high and low-pressure cleaning, hydraulic hose connections, ceiling booms, and other industrial applications. Designed for smooth performance under pressure, it features very low torque, sealed stainless steel bearings, and maintenance-free operation.
With a robust design including 1x thrust and 1x radial ball bearing, and an O-ring NBR seal system (upgradeable to EPDM or FKM), this swivel ensures reliable rotation at high PSI, making it an ideal solution for demanding environments.
Applications
-
Pressure washers and cleaning systems
-
Hydraulic and pneumatic hose assemblies
-
Ceiling booms and rotary arms
-
Car wash equipment
-
Hose reels and industrial setups
Key Features
-
Model: Mosmatic DGS 30.654
-
Material: Brass, nickel plated
-
Thread IN (G1): 3/8" NPTF
-
Thread OUT (G2): 3/8" NPTF
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: 1x thrust, 1x radial ball bearing
-
Low Torque Operation: Smooth rotation at high pressure
-
Maintenance-Free: Sealed stainless steel bearings
-
Overall Diameter: 0.98"
-
Overall Length: 2.71"
-
Nominal Width (NW): 3/8"
-
Wrench Size (SW): 0.87"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTF
Thread Out: G2 3/8" NPTF
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.87"
Length 1 (L1) (overall length) : 2.71"
Diameter (D) (overall diameter): 0.98"
Weight: 5.6 oz
The Mosmatic DGVI Swivel 32.752 is engineered for high-performance in HP-Guns, hydraulic systems, and high-pressure hose reels. Built entirely from stainless steel, this swivel offers live rotation under maximum pressure and is designed to handle intense working conditions while remaining maintenance-free.
Its single thrust ball bearing system and O-ring NBR seal (optional EPDM or FKM) deliver reliable rotation, corrosion resistance, and leak prevention. This swivel is ideal for professionals needing compact strength and maximum durability in demanding environments.
Applications
-
High-pressure hose reels
-
HP-Guns and pressure washer systems
-
Hydraulic applications
-
Tangle-free hose systems
-
Industrial cleaning equipment
Features
-
Material: Full stainless steel construction
-
Thread IN (G1): 1/4" NPTM
-
Thread OUT (G2): 1/4" NPTF
-
Overall Length: 2.60"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 7300 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
-
Bearing System: 1x thrust ball bearing
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Benefits: Live rotation, corrosion resistance, compact, maintenance free
Specs
Pressure: 7300 psi (50 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTM
Thread Out: G2 1/4" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 2.60"
Length 2 (L2): 0.39"
Weight: 5.2 oz
The Mosmatic DGV Swivel 32.569 is a brass, nickel-plated swivel built for superior performance in high-pressure systems. Designed for HP-Guns, hydraulic applications, and hose connections, it provides smooth and reliable rotation under pressure. The single thrust ball bearing and O-ring NBR seal (with optional EBDM or FKM upgrades) offer leak-free operation and extended service life. This swivel is ideal for keeping hoses tangle-free while ensuring optimal flow and control, all in a compact, corrosion-resistant, and maintenance-free design.
Applications
-
High-pressure spray guns
-
Hydraulic and pneumatic hose connections
-
Industrial fluid handling
-
Hose reels and car wash systems
-
Anti-kink swivel joints
Features
-
Material: Brass, nickel plated
-
Thread IN (G1): 3/8" NPTF
-
Thread OUT (G2): 3/8" NPTF
-
Overall Length: 2.87"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
-
Seal System: O-ring NBR (optional: EBDM or FKM)
-
Bearing Type: 1x thrust ball bearing
-
Design Benefits: Compact, corrosion-resistant, tangle-free, maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTF
Thread Out: G2 3/8" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Wrench Size 2 (SW2): 0.87"
Length 1 (L1) (overall length) : 2.87"
Weight: 7.1 oz
The Mosmatic WDG Swivel 40.453 is a robust, high-performance swivel designed for long-lasting use in high-pressure cleaning systems. Constructed from nickel-plated brass, this swivel delivers corrosion resistance and durability in demanding environments. It features a sliding bearing for smooth, low-friction rotation and a sealing system that includes a standard O-ring NBR with support ring, and optional EPDM or FKM seals to meet specific temperature or chemical compatibility needs. With 1/2" NPTF inlet to 1/2" NPTM outlet, it handles up to 4000 psi, 30 RPM, and 250°F, making it ideal for professional hose reels, ceiling booms, and pressure cleaners.
Applications
-
Industrial pressure washer setups
-
Ceiling booms and wall booms
-
Heavy-duty hose reels and spray systems
-
Food and chemical washdown equipment
-
Inline hose swivel in high-volume flow systems
Features
-
Nickel-plated brass construction for strength and corrosion protection
-
Sliding bearing ensures smooth, controlled rotation
-
Thread IN: ½" NPTF | Thread OUT: ½" NPTM
-
Dimensions: Height – 1.1" | Overall Length – 2.17"
-
Nominal Width (NW): ½"
-
Rated for up to 4000 psi operating pressure
-
Temperature range up to 250°F
-
Max rotational speed: 30 RPM
-
Sealing system: O-ring NBR with support ring, optional EPDM or FKM available
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: 30
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR / Support ring (EPDM or FKM optional)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2" NPTF
Thread Out: G2 1/2" NPTM
Nominal Width (NW): 1/2"
Wrench Size (SW): 0.87
Height (H): 1.1
Length 1 (L1): 1.77
Length 2 (L2) (overall length): 2.17
Length 3 (L3): 1.14
Length 4 (L4): 1.52
Length 5 (L5): 0.59
Length 6 (L6): 0.1
Weight: 9.3 oz
The Mosmatic 50.153 QVS Quick Connection Fitting is a robust and professional-grade adapter engineered for use in high-pressure cleaning systems, pneumatic tools, and industrial fluid connections. It features a G1 M22x1.5 female thread and a G2 3/8" NPT male thread, offering a versatile and reliable connection for spray guns, hoses, and other compatible equipment.
Built using nickel-plated brass and stainless steel internals, the 50.153 ensures excellent resistance to wear and corrosion. The blue plastic exterior makes it easy to identify in busy setups while maintaining a lightweight profile.
Applications:
-
Pressure washing equipment
-
Car wash systems
-
Pneumatic and compressed air lines
-
Industrial cleaning tools
Features:
-
Genuine Mosmatic QVS quick connect fitting
-
G1 M22x1.5F to G2 3/8" NPTM threading
-
3600 psi pressure rating and 250° temperature tolerance
-
Rugged construction with internal stainless steel parts
-
Lightweight, compact, and color-coded for easy use
Specs
Pressure: 3600 psi*
Temperature: 250°
RPM: max 30 rpm
Material Type: brass, nickel plated and blue plastic
Inner Part: stainless steel
Seal: O-ring NBR**
Throughput / medium: pH 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 (QV) M22x1.5 F
Thread Out: G2 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.75
Diameter (D): 0.55
Length 1 (overall length): 1.91"
Length 2: 0.51"
Weight: 3.3 oz
The Mosmatic DGV Swivel 32.562 is a brass, nickel-plated swivel built for high-pressure cleaning systems and hydraulic hose connections. It enables live rotation under full pressure, improving equipment performance and operator handling. Engineered with a single thrust ball bearing and a reliable O-ring NBR seal system (optional EBDM or FKM), this swivel is corrosion resistant, maintenance free, and supports consistent operation in demanding applications.
Applications
-
High-pressure HP-Guns
-
Hydraulic and pneumatic systems
-
Tangle-free hose connections
-
Pressure cleaning tools
Features
-
Material: Brass, nickel-plated
-
Thread IN (G1): 3/8" NPTM
-
Thread OUT (G2): 1/4" NPTF
-
Overall Length: 2.63"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
-
Seal System: O-ring NBR (optional EBDM or FKM)
-
Bearing Type: 1x thrust ball bearing
-
Key Benefits: Maintenance free, corrosion resistant, compact form factor
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTM
Thread Out: G2 1/4" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 2.63"
Length 2 (L2): 0.43"
Weight: 5.7 oz
The Mosmatic 50.154 QVS Quick Connection Fitting is a high-performance adapter designed for demanding industrial and commercial applications. This model connects a G1 M22x1.5 female thread to a G2 3/8" NPT female thread, offering excellent compatibility with pressure washing tools, pneumatic systems, and cleaning equipment.
Engineered with nickel-plated brass, stainless steel internal parts, and a blue plastic outer shell, this fitting delivers durability, corrosion resistance, and consistent performance under pressure and heat.
Applications:
-
Industrial pressure washer systems
-
Pneumatic air tools
-
Cleaning and car wash equipment
-
High-pressure fluid connections
Features:
-
Authentic Mosmatic QVS quick-connect fitting
-
Threading: G1 M22x1.5F to G2 3/8" NPTF
-
Designed for high-pressure, high-temperature use
-
Corrosion-resistant materials for long life
-
Blue color coding for quick visual identification
-
Heavier-duty version with larger thread diameter
Specs
Pressure: 3600 psi*
Temperature: 250°
RPM: max 30 rpm
Material Type: brass, nickel plated and blue plastic
Inner Part: stainless steel
Seal: O-ring NBR**
Throughput / medium: pH 3–12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 (QV) M22x1.5 F
Thread Out: G2 3/8" NPTF
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.87
Diameter (D): 0.55
Length 1 (overall length): 1.83"
Weight: 4.10 oz
The Mosmatic WDG Swivel 40.031 is a compact, high-quality swivel designed to deliver efficient performance in high-pressure hose reels, ceiling booms, and cleaning systems. Made from nickel-plated brass, this swivel is built for corrosion resistance and long service life. It features a sliding bearing for smooth rotation and an O-ring NBR seal for dependable leak protection. With a ⅜" NPTF inlet and ¼" NPTM outlet, this swivel is ideal for systems that require connection adaptation. It supports up to 2200 psi, operates at 30 RPM, and withstands temperatures up to 200°F.
Applications
-
Pressure washers and hose reels
-
Surface cleaners and spray guns
-
Compact and mobile washdown systems
-
Equipment with mixed NPT thread sizes
-
Industrial and commercial cleaning applications
Features
-
Durable nickel-plated brass construction for corrosion resistance
-
Sliding bearing allows smooth and stable rotation
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTM
-
Compact size: Height – 1.02" | Overall Length – 1.89"
-
Nominal Width (NW): 1/4"
-
Rated for 2200 psi operating pressure
-
Handles temperatures up to 200°F
-
Supports up to 30 RPM rotational speed
-
Equipped with O-ring NBR seal for leak-free operation
Specs
Pressure: 2200 psi
Temperature: 200°F
RPM: 30
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTF
Thread Out: G2 1/4" NPTM
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.87
Height (H): 1.02
Length 1 (L1): 1.77
Length 2 (L2) (overall length): 1.89
Length 3 (L3): 1.14
Length 4 (L4): 1.14
Length 5 (L5): 0.47
Length 6 (L6): 0.25
Weight: 9.6 oz
The Mosmatic WDB Swivel 43.251 is a precision-engineered, nickel-plated brass swivel designed for high-pressure cleaning applications. Ideal for use in hose reels, ceiling booms, and pressure washers, this compact swivel features a sliding bearing for reliable, smooth rotation under load. Sealed with a durable O-ring NBR, it delivers long-lasting leak protection in tough environments. With a thread configuration of 1/4" NPTF (inlet) to 1/4" NPTM (outlet), this swivel supports up to 4000 psi, 30 RPM, and 250°F, making it a powerful solution for compact, high-pressure systems.
Applications
-
High-pressure hose reels
-
Overhead or wall-mounted ceiling booms
-
High-pressure washers and cleaning systems
-
Stationary and mobile wash bays
-
Car wash equipment and service stations
Key Features
-
Durable nickel-plated brass construction for corrosion protection
-
Sliding bearing design for smooth and controlled rotation
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTM
-
Compact dimensions: Height – 1.06" | Overall Length – 1.89"
-
Nominal Width (NW): 1/4"
-
Handles pressures up to 4000 psi
-
Operates at temperatures up to 250°F
-
Supports 30 RPM for low-speed, high-pressure applications
-
O-ring NBR seal for reliable, leak-resistant performance
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: 30
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 1/4" NPTM
Nominal Width (NW): 1/4"
Wrench Size (SW): 0.87
Height (H): 1.06
Length 1 (L1): 1.77
Length 2 (L2) (overall length): 1.89
Length 3 (L3): 1.14
Length 4 (L4): 1.10
Length 5 (L5): 0.39
Weight:10.0 oz
The Mosmatic DGE Swivel - 34.765 is a rugged, high-flow stainless steel swivel designed for high-pressure applications where thrust and radial forces must be managed reliably. Equipped with 1x thrust ball bearing and 2x sliding bearings, this swivel delivers stable, low-RPM rotation and long-term durability. Its corrosion-resistant stainless steel construction makes it ideal for demanding environments such as pharmaceutical processing, food and beverage sanitation, automatic car wash systems, and industrial fluid handling.
Applications:
-
Food and beverage cleaning and transfer systems
-
Pharmaceutical production and CIP processes
-
Rotary spray arms in car wash systems
-
Industrial chemical handling and washdown
Key Features:
-
Corrosion-resistant stainless steel housing
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Handles both thrust and radial loads under high pressure
-
High-flow design with smooth low-RPM operation
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTF
-
Nominal Width (NW): 1"
-
Diameter: 2.35"
-
Overall Length: 3.54"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTF
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.42
Wrench Size 2 (SW2): 1.97
Diameter (D1): 2.35"
Length 1 (L1) (overall length): 3.54"
Length 2 (L2): 2.56
Weight: 44oz
The Mosmatic DGE Swivel - 34.884 is a high-performance, corrosion-resistant swivel designed for high-pressure fluid systems where both thrust and radial forces are present. Constructed with a nickel-plated brass housing and a stainless steel interior, this swivel is ideal for industrial and food-grade applications requiring durability and hygiene. With one thrust ball bearing, offering reliable rotation and smooth operation even under continuous use. Rated for up to 4000 PSI and 250°F, it supports high-flow performance in rigorous environments.
Applications:
-
Industrial high-pressure fluid and washdown systems
-
Food and beverage processing and sanitation lines
-
Chemical transfer and hygienic applications
-
Rotary connections in hose reels and cleaning systems
Key Features:
-
Nickel-plated brass construction with stainless steel internals
-
With 1x thrust ball bearing
-
Engineered for both thrust and radial load stability
-
High-flow capacity and corrosion resistance
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF
-
Nominal Width (NW): 3/4"
-
Diameter: 1.96"
-
Overall Length: 4.29"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTF
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.26
Diameter (D1): 1.96"
Diameter 2 (D2): 1.96
Length 1 (L1) (overall length): 4.29"
Length 2 (L2): 2.40
Length 4 (L4): 0.75
Length 5 (L5): 0.87
Weight: 36.0oz
The Mosmatic WDEI Swivel 40.462 is a high-pressure stainless steel swivel designed for durability and peak performance in hose reel applications. Engineered with a sliding bearing for smooth, consistent rotation, this swivel is ideal for demanding environments where reliability is key. It features a standard O-ring NBR seal, with optional EPDM or FKM for enhanced compatibility with specific fluids or elevated temperatures. The swivel's 3/8" NPTF inlet to 3/8" NPTM outlet connection supports up to 5800 psi, 30 RPM, and 250°F, making it a trusted solution for industrial pressure systems.
Applications
-
High pressure hose reels
-
Industrial cleaning systems
-
Equipment requiring high-strength swivel connections
-
Chemical or fluid handling applications (with optional seals)
Features
-
Stainless steel construction for corrosion resistance and durability
-
Sliding bearing enables smooth and controlled rotation
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Dimensions: Overall Diameter – 1.26" | Overall Length – 2.17"
-
Nominal Width (NW): 3/8"
-
Supports pressures up to 5800 psi
-
Withstands temperatures up to 250°F
-
Max RPM: 30
-
Sealing system: O-ring NBR (optional EPDM or FKM for chemical compatibility)
Specs
Pressure: 5800 psi (40 MPa)
Temperature: 250°F
RPM: 30
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR (EPDM or FKM optional)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTF
Thread Out: G2 3/8" NPTM
Nominal Width (NW): 3/8"
Wrench Size (SW): 0.87
Length 1 (L1): 1.77
Length 2 (L2) (overall length): 2.17
Length 3 (L3): 1.14
Length 4 (L4): 1.54
Diameter (D1): 1.26
Weight: 8.7 oz
Showing 45/310
Next