Industrial and Process Cleaning Swivels

The Mosmatic DGG Swivel 33.503 (90 Degrees) is a brass, nickel-plated swivel engineered for high-pressure and self-rotating cleaning systems. Designed for optimal performance in demanding applications such as parts washers, tire cleaners, and industrial surface cleaning equipment, it ensures reliable rotation and long-term durability.

Equipped with a triple bearing system—2x radial ball bearings and 1x thrust ball bearing—this swivel delivers smooth, precise rotation under pressure. The integrated O-ring NBR seal system offers excellent sealing performance, with optional EPDM or FKM variants for compatibility with a wide range of chemicals. With a compact 90° body, corrosion-resistant materials, and bulkhead mounting capability, the DGG 33.503 offers maintenance-free operation for continuous-duty use.

Applications

• High-pressure rotating cleaning equipment

• Tire and underbody cleaning systems

• Parts washers and degreasers

• Self-rotating surface cleaners

• Industrial and commercial cleaning systems

Key Features

• Design: 90° angled swivel

• Material: Brass, nickel plated

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing Type: Triple bearing (2x radial, 1x thrust)

• Thread IN (G1): M21x1.5M

• Thread OUT (G2): G3/8" M

• Overall Diameter: 1.34"

• Overall Length: 2.76"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Mounting Style: Bulkhead fitting

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 M21X1.5M

Thread Out: G2 G3/8"M

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.76"

Length 2 (L2): 0.47"

Weight: 10.4 oz

The Mosmatic DGG Swivel 33.154 is a durable, high-performance brass swivel engineered for high-pressure and self-rotating cleaning applications. Ideal for parts washers, tire cleaners, and industrial wash systems, this swivel ensures reliable performance with minimal maintenance.

It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth and consistent rotation. The integrated O-ring NBR seal system offers secure sealing and is optionally available with EPDM or FKM materials for enhanced chemical resistance. The nickel-plated finish provides corrosion resistance, and the bulkhead design allows for easy mounting and long-term use in harsh environments.

Applications

• High-pressure cleaning systems

• Parts washing machines

• Self-rotating cleaning heads

• Tire and undercarriage washers

• Industrial wash bays and equipment

Key Features

• Material: Brass, nickel plated

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2x radial, 1x thrust)

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 3/8" NPTF

• Overall Diameter: 1.34"

• Overall Length: 2.87"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Mounting: Bulkhead fitting

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.87"

Weight: 8.8 oz

The Mosmatic DGG Swivel 33.152 is a precision-engineered brass, nickel-plated swivel built for demanding high-pressure cleaning and self-rotating applications. This swivel is ideal for use in tire cleaners, industrial parts washers, and automated cleaning equipment.

Its advanced triple bearing system—featuring two radial ball bearings and one thrust ball bearing—ensures smooth, reliable rotation even under continuous high pressure. The O-ring NBR sealing system offers dependable leak resistance and can be optionally configured with EPDM or FKM seals for chemical compatibility. Corrosion-resistant and maintenance-free, this swivel is designed for long-lasting performance in tough environments.

Applications

• High-pressure cleaning systems

• Parts washers

• Self-rotating cleaning heads

• Tire and underbody wash systems

• Industrial automated cleaning equipment

Key Features

• Material: Brass, nickel plated

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2x radial, 1x thrust)

• Thread IN (G1): 3/8" NPTF

• Thread OUT (G2): 1/4" NPTF

• Overall Diameter: 1.34"

• Overall Length: 2.75"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Mounting Type: Bulkhead fitting

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8" NPTF

Thread Out: G2 1/4" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.75"

Weight: 8.7 oz

The Mosmatic DGG Swivel 33.054 is a premium brass, nickel-plated swivel engineered for high-pressure cleaning and self-rotating applications. Built with durability and precision in mind, this swivel is ideal for equipment such as parts washers, tire cleaners, and surface cleaners.

Featuring a triple bearing system—2x radial ball bearings and 1x thrust ball bearing—the 33.054 ensures smooth, reliable rotation under demanding conditions. Its O-ring NBR seal system provides secure sealing, with optional upgrades to EPDM or FKM for enhanced chemical resistance. Designed with a bulkhead mounting configuration, this swivel delivers maintenance-free operation and long-lasting performance in corrosive environments.

Applications

• High-pressure cleaning systems

• Self-rotating surface cleaners

• Tire and undercarriage washers

• Industrial parts cleaning

• Automated wash systems

Key Features

• Material: Brass, nickel plated

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2x radial, 1x thrust)

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 3/8" NPTF

• Overall Diameter: 1.34"

• Overall Length: 2.87"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

• Mounting Type: Bulkhead fitting

• Maintenance: Maintenance-free

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.87"

Weight: 8.5 oz

The Mosmatic DGG Swivel 33.053 is a premium brass, nickel-plated swivel designed for high-pressure cleaning systems and self-rotating applications. Its triple bearing design (2x radial, 1x thrust) ensures optimal rotation and extended performance in demanding environments.

Featuring an O-ring NBR seal system (with optional EPDM or FKM upgrades), this swivel is built to resist corrosion and withstand high temperatures and pressure. With a bulkhead-style mounting, it’s easy to integrate into tire cleaners, parts washers, and other industrial cleaning setups.

Applications:

• Self-rotating high-pressure cleaning systems

• Tire and wheel washers

• Industrial parts cleaning equipment

• Stationary or automated wash systems

• Spray arms and nozzle assemblies

Key Features:

• Material: Brass, nickel plated for corrosion resistance

• Seal System: O-ring NBR (optional EPDM or FKM)

• Bearings: Triple bearing system (2x radial, 1x thrust)

• Mounting: Bulkhead design for secure installation

• Thread IN: 1/4" NPTF

• Thread OUT: 3/8" NPTM

• Overall Diameter: 1.34"

• Overall Length: 2.75"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

• Performance: Maintenance-free, high-precision operation

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 3/8" NPTM

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.75"

Wrench Size 3 (SW3): 1.34"

Diameter (D) (overall diameter): 1.34"

Length 1 (L1) (overall length) : 2.75"

Length 2 (L2): 0.47"

Weight: 7.4 oz

The Mosmatic DGL Swivel 31.054 is a brass, nickel-plated swivel engineered to handle both thrust and radial forces in high-pressure cleaning systems. Designed for high-flow performance, it is ideal for use in automatic car wash equipment, high-pressure hose reels, and various industrial cleaning systems.

This swivel features a triple bearing system consisting of two radial ball bearings and one thrust ball bearing for long-lasting, smooth operation. The integrated O-ring NBR seal system provides reliable sealing, with optional upgrades to EPDM or FKM seals for chemical-specific environments. Its corrosion-resistant construction and maintenance-free design ensure durability and reduced downtime in demanding applications.

Applications

• Automatic and tunnel car washes

• High-pressure hose reels

• Wash bays and gantry systems

• Industrial and mobile wash equipment

• Surface and underbody cleaning tools

Key Features

• Model: Mosmatic DGL 31.054

• Material: Brass, nickel-plated

• Thread IN (G1): 1/4" NPTF

• Thread OUT (G2): 3/8" NPTF

• Seal Type: O-ring NBR (optional EPDM or FKM)

• Bearing System: Triple bearing (2 radial, 1 thrust)

• Mounting: Bulkhead fitting

• Corrosion Resistance: Yes

• Maintenance: Maintenance-free

• Overall Diameter: 0.98"

• Overall Length: 2.87"

• Nominal Width (NW): 1/4"

• Wrench Size (SW): 0.87"

• Max Pressure: 4000 PSI

• Max RPM: 1000

• Max Temperature:

  • 90°F at 1000 RPM

  • 250°F at 30 RPM

Specs 

Pressure: 4000 psi (27.5 MPa)

Temperature: 90°F at 1000 RPM, 250°F at 30 RPM

RPM: max 1,000 rpm

Material Type: Brass, Nickel plated

Inner Part: Stainless steel

Seal: O-ring NBR (optional: EPDM or FKM)

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1/4" NPTF

Thread Out: G2 3/8" NPTF

Nominal Width (NW): 1/4"

Wrench Size 1 (SW1): 0.87"

Wrench Size 2 (SW2): 0.87"

Length 1 (L1) (overall length) : 2.87"

Diameter (D) (overall diameter): 0.98"

Weight: 6.8 oz

The Mosmatic DGE Swivel - 34.787 is a robust stainless steel swivel engineered for high-pressure and high-flow systems that must reliably manage thrust and radial forces. Designed with a durable bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, long-lasting performance under continuous use. Rated for 2900 PSI and capable of withstanding temperatures up to 250°F, it is perfect for demanding pharmaceutical, food processing, industrial cleaning, and automatic car wash applications.

Applications:

• Food and beverage production and sanitation lines

• Pharmaceutical clean-in-place (CIP) systems

• Industrial fluid handling and high-pressure washdowns

• Rotary spray arms and booms in automatic car washes

Key Features:

• Corrosion-resistant stainless steel construction

• With 1x thrust ball bearing and 2 x sliding bearings

• Supports both thrust and radial loads with high stability

• High-flow performance designed for low-RPM, high-pressure use

• Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTF

• Nominal Width (NW): 1 1/2"

• Diameter: 3.33"

• Overall Length: 5.87"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/2"NPTF

Thread Out: G2 1 1/2"NPTF

Nominal Width (NW): 1 1/2"

Wrench Size (SW1): 2.13

Diameter 1 (D1): 3.33"

Diameter 2 (D2): 3.98

Length 1 (L1) (overall length): 5.87"

Length 2 (L2): 3.17

Length 4 (L4): 1.66

Length 5 (L5): 1.42

Weight: 181.5oz

The Mosmatic DGE Swivel - 34.786 is a high-performance stainless steel swivel engineered for high-pressure applications that demand reliable management of thrust and radial forces. Equipped with a reliable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent operation even in the most demanding conditions. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is an ideal choice for pharmaceutical, food processing, industrial cleaning, and automatic car wash systems.

Applications:

• Food and beverage sanitation and processing systems

• Pharmaceutical clean-in-place (CIP) applications

• Industrial washdown and fluid transfer

• Rotary spray systems in automatic car washes

Key Features:

• Durable stainless steel construction for maximum corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Supports high-flow, low-RPM, high-pressure applications

• Designed to handle both thrust and radial loads efficiently

• Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTF

• Nominal Width (NW): 1 1/4"

• Diameter: 2.76"

• Overall Length: 5.37"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/4"NPTF

Thread Out: G2 1 1/4"NPTF

Nominal Width (NW): 1 1/4"

Wrench Size (SW1): 1.97

Diameter 1 (D1): 2.76"

Diameter 2 (D2): 3.07

Length 1 (L1) (overall length): 5.37"

Length 2 (L2): 2.84

Length 4 (L4): 1.18

Length 5 (L5): 1.30

Weight: 94.7oz

The Mosmatic DGE Swivel - 34.785 is a durable stainless steel swivel engineered for high-pressure environments requiring precise management of thrust and radial forces. Featuring a reliable bearing system with 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth operation under continuous use. Designed for a max pressure of 2900 PSI and temperature resistance up to 250°F, it is the ideal solution for pharmaceutical, food processing, industrial, and automatic car wash applications.

Applications:

• Food and beverage production and sanitation systems

• Pharmaceutical clean-in-place (CIP) and processing lines

• Industrial washdown and chemical distribution

• Rotary spray arms in automatic car washes

Key Features:

• Heavy-duty stainless steel construction for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Engineered to handle both thrust and radial loads

• High-flow performance designed for low-RPM applications

• Thread IN: 1" NPTF | Thread OUT: 1" NPTF

• Nominal Width (NW): 1"

• Diameter: 2.35"

• Overall Length: 4.65"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTF

Nominal Width (NW): 1"

Wrench Size (SW1): 1.42

Diameter 1 (D1): 2.35"

Diameter 2 (D2): 2.83

Length 1 (L1) (overall length): 4.65"

Length 2 (L2): 2.52

Length 4 (L4): 1.18

Length 5 (L5): 1.14

Weight: 74.3oz

The Mosmatic DGE Swivel - 34.780 is a robust stainless steel swivel designed for high-pressure applications involving both thrust and radial forces. Built for durability and precision, this swivel features a robust bearing system that includes 1x thrust ball bearing and 2x sliding bearings, ensuring smooth, long-lasting performance. With a pressure rating of 5000 PSI and temperature resistance up to 250°F, it is ideal for continuous operation in pharmaceutical, food service, industrial, and automatic car wash environments.

Applications:

• Food and beverage production and sanitation

• Clean-in-place (CIP) systems in pharmaceutical facilities

• Industrial washdown and chemical processing

• Rotary arms and sprayers in automatic car wash systems

Key Features:

• Heavy-duty stainless steel body for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Designed to support both thrust and radial load applications

• High-flow, low-RPM swivel for continuous-duty use

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTF

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 4.35"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTF

Nominal Width (NW): 3/4"

Wrench Size (SW1): 1.26

Diameter 1 (D1): 1.97"

Diameter 2 (D2): 1.97

Length 1 (L1) (overall length): 4.35"

Length 2 (L2): 2.40

Length 4 (L4): 0.75

Length 5 (L5): 0.87

Weight: 36.0oz

The Mosmatic DGE Swivel - 34.777 is a heavy-duty stainless steel swivel engineered for high-pressure operations where managing thrust and radial forces is essential. Featuring a durable bearing system—with 1x thrust ball bearing and 2x sliding bearings—this swivel ensures long-lasting, smooth rotation under continuous load. Corrosion-resistant and built for high-flow performance, it is ideal for demanding pharmaceutical, food service, industrial, and automatic car wash applications. Rated for up to 2900 PSI and 250°F, it delivers outstanding reliability in harsh environments.

Applications:

• Food and beverage processing and sanitation systems

• Pharmaceutical manufacturing and CIP systems

• Industrial high-pressure cleaning and fluid transfer

• Automatic car wash rotary spray arms

Key Features:

• Robust stainless steel construction for maximum corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Smooth low-RPM operation handling both thrust and radial forces

• High-flow capacity ideal for continuous-use applications

• Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM

• Nominal Width (NW): 1 1/2"

• Diameter: 3.33"

• Overall Length: 6.12"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/2"NPTF

Thread Out: G2 1 1/2"NPTM

Nominal Width (NW): 1 1/2"

Wrench Size (SW1): 1.97

Diameter 1 (D1): 3.33"

Diameter 2 (D2): 3.98

Length 1 (L1) (overall length): 6.12"

Length 2 (L2): 3.17

Length 3 (L3): 0.79

Length 4 (L4): 1.42

Length 5 (L5): 1.42

Weight: 182.9oz

The Mosmatic DGE Swivel - 34.776 is a high-performance stainless steel swivel engineered for high-pressure applications requiring dependable rotation under thrust and radial forces. Designed with a durable bearing system—including 1x thrust ball bearing and 2x sliding bearings—this swivel provides smooth, reliable operation in continuous-duty cycles. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, it is corrosion resistant and ideal for use in pharmaceutical, food processing, automatic car washes, and industrial fluid systems.

Applications:

• Food and beverage sanitation and fluid transfer systems

• Pharmaceutical manufacturing and CIP applications

• Industrial high-pressure washdown and rinsing stations

• Rotary spray systems in automatic car wash setups

Key Features:

• Stainless steel construction for excellent corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Designed to handle both thrust and radial loads

• Supports high-flow, low-RPM applications

• Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM

• Nominal Width (NW): 1 1/4"

• Diameter: 2.76"

• Overall Length: 5.65"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1 1/4"NPTF

Thread Out: G2 1 1/4"NPTM

Nominal Width (NW): 1 1/4"

Wrench Size (SW1): 1.47

Diameter 1 (D1): 2.76"

Diameter 2 (D2): 3.07

Length 1 (L1) (overall length): 5.65"

Length 2 (L2): 2.84

Length 3 (L3): 0.79

Length 4 (L4): 1.18

Length 5 (L5): 1.30

Weight: 92.5oz

The Mosmatic DGE Swivel - 34.775 is a robust stainless steel swivel designed for high-pressure applications that demand durability, hygiene, and smooth rotation. Built to withstand both thrust and radial forces, it features a precision-engineered bearing system consisting of 1x thrust ball bearing and 2x sliding bearings. This swivel is corrosion resistant and built for continuous use in pharmaceutical, food service, automatic car wash, and industrial cleaning systems. With a pressure rating of 2900 PSI and a max temperature of 250°F, it delivers long-term, high-flow performance.

Applications:

• Food and beverage processing and sanitation

• Pharmaceutical clean-in-place (CIP) systems

• Industrial washdown and chemical handling

• Rotary spray assemblies in automatic car washes

Key Features:

• Stainless steel body for superior corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Supports both thrust and radial loads in high-pressure use

• Designed for high-flow, low-RPM environments

• Thread IN: 1" NPTF | Thread OUT: 1" NPTM

• Nominal Width (NW): 1"

• Diameter: 2.35"

• Overall Length: 4.84"

• Max Pressure: 2900 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 2900 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 1"NPTF

Thread Out: G2 1"NPTM

Nominal Width (NW): 1"

Wrench Size (SW1): 1.42

Diameter 1 (D1): 2.35"

Diameter 2 (D2): 2.83

Length 1 (L1) (overall length): 4.84"

Length 2 (L2): 2.52

Length 3 (L3): 0.71

Length 4 (L4): 1.18

Length 5 (L5): 1.14

Weight: 77.1oz

The Mosmatic DGE Swivel - 34.774 is a durable, high-performance stainless steel swivel designed for high-pressure, high-flow systems requiring reliable handling of both thrust and radial forces. Built with a robust bearing system—featuring 1x thrust ball bearing and 2x sliding bearings—this swivel ensures smooth, consistent rotation even under demanding continuous use. With a pressure rating of 5000 PSI and temperature tolerance up to 250°F, it’s ideal for pharmaceutical, food service, automatic car wash, and industrial cleaning applications.

Applications:

• Food and beverage production and sanitation systems

• Pharmaceutical clean-in-place (CIP) operations

• High-pressure washdown and fluid systems in industry

• Rotary spray systems in automatic car washes

Key Features:

• Corrosion-resistant stainless steel construction

• With 1x thrust ball bearing and 2 x sliding bearings

• Manages both thrust and radial forces under high pressure

• Smooth low-RPM operation with high-flow efficiency

• Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM

• Nominal Width (NW): 3/4"

• Diameter: 1.97"

• Overall Length: 4.35"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/4"NPTF

Thread Out: G2 3/4"NPTM

Nominal Width (NW): 3/4"

Wrench Size (SW1): 1.06

Diameter 1 (D1): 1.97"

Diameter 2 (D2): 1.97

Length 1 (L1) (overall length): 4.35"

Length 2 (L2): 2.40

Length 3 (L3): 0.63

Length 4 (L4): 0.75

Length 5 (L5): 0.87

Weight: 35.7oz

The Mosmatic DGE Swivel - 34.772 is a precision-built stainless steel swivel designed to manage thrust and radial forces in high-pressure, high-flow applications. Featuring a robust bearing system with 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth, consistent operation even under continuous use. Rated for up to 5000 PSI and resistant to temperatures up to 250°F, it’s the perfect solution for demanding pharmaceutical, food service, industrial washdown, and automatic car wash systems.

Applications:

• High-pressure fluid transfer in food and beverage production

• Pharmaceutical clean-in-place (CIP) systems

• Industrial washdown and chemical spray lines

• Rotary arms and sprayers in automatic car wash facilities

Key Features:

• Durable stainless steel construction for corrosion resistance

• With 1x thrust ball bearing and 2 x sliding bearings

• Designed to handle both thrust and radial loads

• High-flow performance for low-RPM applications

• Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM

• Nominal Width (NW): 3/8"

• Diameter: 1.65"

• Overall Length: 3.46"

• Max Pressure: 5000 PSI

• Max RPM: 30

• Max Operating Temperature: 250°F

Specs

Pressure: 5000 psi

Temperature: 250°F

RPM: Max. 30

Material Type: Stainless Steel

Inner Part: Stainless Steel

Seal: O-ring NBR

Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)

Thread In: G1 3/8"NPTF

Thread Out: G2 3/8"NPTM

Nominal Width (NW): 3/8"

Wrench Size 1 (SW1): 0.87

Diameter 1 (D1): 1.65"

Diameter 2 (D2): 1.65

Length 1 (L1) (overall length): 3.46"

Length 2 (L2): 2.09

Length 3 (L3): 0.43

Length 4 (L4): 0.67

Length 5 (L5): 0.55

Weight: 22.5oz