Tools, Safety and Specialty Swivels
Sort by:
The Mosmatic DGE Swivel - 34.763 is a precision-engineered stainless steel swivel designed to handle thrust and radial forces in high-pressure and high-flow applications. Featuring 1x thrust ball bearing and 2x sliding bearings, this swivel ensures smooth, reliable performance in continuous-use systems. With a robust pressure rating of 5000 PSI and resistance to temperatures up to 250°F, it's ideal for demanding operations in pharmaceutical, food processing, automatic car wash, and industrial fluid handling systems.
Applications:
-
Pharmaceutical clean-in-place (CIP) systems
-
Food and beverage production and sanitation
-
High-pressure spray systems in car washes
-
Industrial cleaning and chemical distribution
Key Features:
-
Corrosion-resistant stainless steel construction
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Designed for high-flow, low-RPM, high-pressure environments
-
Supports both radial and thrust load applications
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF
-
Nominal Width (NW): 1/2"
-
Diameter: 1.65"
-
Overall Length: 3.15"
-
Max Pressure: 5000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTF
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.06
Wrench Size 2 (SW2): 1.38
Diameter (D1): 1.65"
Length 1 (L1) (overall length): 3.15"
Length 2 (L2): 2.58
Weight: 22.0oz
The Mosmatic DGE Swivel - 34.757 is a high-quality stainless steel swivel engineered for high-pressure, high-flow systems requiring reliable performance under thrust and radial loads. Designed for use in pharmaceutical processing, food and beverage sanitation, industrial washdown, and automatic car wash systems, this swivel is built to withstand demanding environments. It features 1x thrust ball bearing and 2x sliding bearings to ensure smooth, long-lasting operation. With a pressure rating of 2900 PSI and temperature resistance up to 250°F, this swivel provides both durability and efficiency.
Applications:
-
Food and beverage processing and cleaning lines
-
Pharmaceutical clean-in-place (CIP) systems
-
Automatic car wash rotary spray assemblies
-
Industrial chemical and fluid handling systems
Key Features:
-
Durable stainless steel body for corrosion and chemical resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
Supports both thrust and radial force applications
-
High-flow performance for low-RPM, high-pressure use
-
Thread IN: 1 1/2" NPTF | Thread OUT: 1 1/2" NPTM
-
Nominal Width (NW): 1 1/2"
-
Diameter: 3.33"
-
Overall Length: 4.61"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/2"NPTF
Thread Out: G2 1 1/2"NPTM
Nominal Width (NW): 1 1/2"
Wrench Size 1 (SW1): 1.97
Wrench Size 2 (SW2): 2.76
Diameter (D1): 3.33"
Length 1 (L1) (overall length): 4.61"
Length 2 (L2): 3.07
Length 3 (L3): 0.79
Weight: 95.3oz
The Mosmatic DGE Swivel - 34.754 is a high-performance stainless steel swivel engineered for high-pressure, high-flow operations across a variety of demanding environments. Designed to support both thrust and radial forces, this swivel features 1x thrust ball bearing and 2x sliding bearings for smooth, reliable operation. With a pressure rating of 5000 PSI and temperature resistance up to 250°F, it’s perfect for applications in pharmaceutical manufacturing, food processing, industrial cleaning, and automatic car wash systems.
Applications:
-
Pharmaceutical fluid handling and CIP systems
-
Food and beverage sanitation and spray lines
-
Car wash sprayers and rotary connections
-
Industrial washdown and chemical systems
Key Features:
-
Rugged stainless steel construction for corrosion resistance
-
With 1x thrust ball bearing and 2 x sliding bearings
-
High-flow capacity for demanding applications
-
Supports both radial and thrust forces at low RPM
-
Thread IN: 3/4" NPTF | Thread OUT: 3/4" NPTM
-
Nominal Width (NW): 3/4"
-
Diameter: 1.97"
-
Overall Length: 3.66"
-
Max Pressure: 5000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 5000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Stainless Steel
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/4"NPTF
Thread Out: G2 3/4"NPTM
Nominal Width (NW): 3/4"
Wrench Size 1 (SW1): 1.06
Wrench Size 2 (SW2): 1.58
Diameter (D1): 1.97"
Length 1 (L1) (overall length): 3.66"
Length 2 (L2): 2.58
Length 3 (L3): 0.63
Weight: 27.8oz
The Mosmatic DGE Swivel - 34.882 is a high-quality, corrosion-resistant swivel designed for high-pressure applications in both industrial and food-grade environments. Featuring a durable nickel-plated brass housing and a stainless steel interior, this swivel handles both thrust and radial forces with ease. With one thrust ball bearing to ensure smooth, stable operation. Rated for 4000 PSI and up to 250°F, this swivel is ideal for continuous-duty use where reliability and hygiene are essential.
Applications:
-
High-pressure washdown and fluid handling systems
-
Food and beverage processing equipment
-
Sanitary chemical delivery lines
-
Industrial hose reels and rotary connections
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Designed for both thrust and radial load applications
-
Corrosion-resistant and suitable for sanitary environments
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTF
-
Nominal Width (NW): 3/8"
-
Diameter: 1.64"
-
Overall Length: 3.39"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 3/8"NPTF
Nominal Width (NW): 3/8"
Wrench Size 1 (SW1): 0.87
Diameter (D1): 1.64"
Diameter 2 (D2): 1.64
Length 1 (L1) (overall length): 3.39"
Length 2 (L2): 2.09
Length 4 (L4): 0.67
Length 5 (L5): 0.55
Weight: 23.5oz
The Mosmatic DGE Swivel - 34.876 is a high-performance swivel designed for high-pressure applications requiring stable support for both thrust and radial forces. Constructed from nickel-plated brass with a stainless steel interior, it provides excellent corrosion resistance and is suitable for both industrial and food-grade environments. Including one thrust ball bearing, ensures smooth, controlled operation. With a 2900 PSI pressure rating and temperature resistance up to 250°F, this swivel delivers high-flow performance and long-term durability in demanding conditions.
Applications:
-
High-pressure industrial cleaning systems
-
Food and beverage processing and washdown lines
-
Chemical transfer and sanitary fluid systems
-
Low-RPM, high-volume fluid handling
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Designed for both thrust and radial force applications
-
Corrosion-resistant and high-flow design
-
Thread IN: G1 1 1/4" NPTF | Thread OUT: G2 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.76"
-
Overall Length: 5.24"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.50
Diameter (D1): 2.76"
Diameter 2 (D2): 3.07
Length 1 (L1) (overall length): 5.24"
Length 2 (L2): 2.62
Length 3 (L3): 0.79
Length 4 (L4): 1.18
Length 5 (L5): 1.10
Weight: 87.9oz
The Mosmatic DGE Swivel - 34.863 is a precision-engineered swivel designed for managing thrust and radial forces in high-pressure fluid systems. Constructed from nickel-plated brass with a stainless steel interior, it offers excellent corrosion resistance and long-lasting performance in both industrial and food-grade environments. Equipped with a 1x thrust ball bearing, ensuring dependable performance., this swivel supports smooth and stable operation under continuous use. Rated for up to 4000 PSI and 250°F, it's ideal for demanding fluid handling and sanitation systems.
Applications:
-
Industrial fluid and pressure wash systems
-
Food and beverage processing equipment
-
Sanitary cleaning and washdown operations
-
High-pressure chemical and water transfer lines
Key Features:
-
Nickel-plated brass body with stainless steel internal components
-
With 1x thrust ball bearing
-
Corrosion resistant and suitable for hygienic applications
-
Supports both thrust and radial loads
-
High-flow, high-pressure rated performance
-
Thread IN: 1/2" NPTF | Thread OUT: 1/2" NPTF
-
Nominal Width (NW): 1/2"
-
Diameter: 1.65"
-
Overall Length: 3.15"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 4000 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/2"NPTF
Thread Out: G2 1/2"NPTF
Nominal Width (NW): 1/2"
Wrench Size 1 (SW1): 1.06
Wrench Size 2 (SW2): 1.38
Diameter (D): 1.65"
Length 1 (L1) (overall length): 3.15"
Length 2 (L2): 2.17
Weight: 22.0oz
The Mosmatic DGE Swivel - 34.856 is a high-performance swivel designed to handle thrust and radial forces in high-pressure, high-flow applications. Made from nickel-plated brass with a stainless steel interior, this swivel is engineered for durability, corrosion resistance, and smooth performance in industrial and food service environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance and long service life. With a pressure capacity of up to 2900 PSI and a temperature limit of 250°F, this swivel is ideal for demanding fluid handling operations.
Applications:
-
High-pressure fluid and washdown systems
-
Food and beverage processing lines
-
Industrial sanitation and cleaning stations
-
Chemical and water transfer operations
Key Features:
-
Nickel-plated brass body with corrosion-resistant stainless steel internals
-
With 1x thrust ball bearing
-
Designed for both thrust and radial load support
-
High-flow capacity with reliable, low-RPM operation
-
Thread IN: 1 1/4" NPTF | Thread OUT: 1 1/4" NPTM
-
Nominal Width (NW): 1 1/4"
-
Diameter: 2.36"
-
Overall Length: 4.17"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1 1/4"NPTF
Thread Out: G2 1 1/4"NPTM
Nominal Width (NW): 1 1/4"
Wrench Size 1 (SW1): 1.50
Wrench Size 2 (SW2): 1.81
Diameter (D): 2.36"
Length 1 (L1) (overall length): 4.17"
Length 2 (L2): 2.66
Length 3 (L3): 0.79
Weight: 2.36oz
The Mosmatic DGE Swivel - 34.855 is a durable, high-performance swivel designed for use in high-pressure applications requiring both thrust and radial force support. Constructed from nickel-plated brass with a stainless steel interior, this swivel is corrosion-resistant and well-suited for industrial and food-grade environments. This swivel includes a 1x thrust ball bearing, ensuring dependable performance, ensuring stable rotation, and consistent performance in demanding operations. With a pressure rating of up to 2900 PSI and temperature tolerance up to 250°F, this swivel offers a reliable solution for fluid transfer and cleaning systems.
Applications:
-
Industrial high-pressure cleaning systems
-
Food and beverage processing lines
-
Sanitary washdown and chemical delivery systems
-
High-flow, low-RPM rotary fluid connections
Key Features:
-
Nickel-plated brass construction with stainless steel interior
-
With 1x thrust ball bearing
-
Supports both thrust and radial force applications
-
Corrosion-resistant for long-term industrial or sanitary use
-
Thread IN: 1" NPTF | Thread OUT: 1" NPTM
-
Nominal Width (NW): 1"
-
Diameter: 2.36"
-
Overall Length: 3.54"
-
Max Pressure: 2900 PSI
-
Max RPM: 30
-
Max Operating Temperature: 250°F
Specs
Pressure: 2900 psi
Temperature: 250°F
RPM: Max. 30
Material Type: Brass, Nickel Plated
Inner Part: Stainless Steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1"NPTF
Thread Out: G2 1"NPTM
Nominal Width (NW): 1"
Wrench Size 1 (SW1): 1.42
Wrench Size 2 (SW2): 1.97
Diameter (D): 2.36"
Length 1 (L1) (overall length): 3.54"
Length 2 (L2): 2.36
Length 3 (L3): 0.71
Weight: 40.3oz
The Mosmatic DGK Swivel 32.544 – 90 Degrees is a premium swivel joint engineered for high-pressure guns, hydraulic hose setups, and tangle-free operations. Built with a durable stainless steel/brass body and nickel-plated finish, it offers maximum corrosion resistance and reliability.
Its compact design incorporates a thrust ball bearing and a robust O-ring NBR seal system (with EPDM or FKM as optional upgrades) to ensure smooth rotation at full pressure, minimal torque, and zero maintenance.
Applications
-
High-pressure gun swivels
-
Hydraulic hose connections
-
Cleaning and spray systems
-
Ceiling booms and wash bays
-
Industrial hose routing
Features
-
Material: Stainless steel/brass with nickel plating
-
Thread IN (G1): 1/4" NPTM
-
Thread OUT (G2): 3/8" NPTF
-
Overall Length: 1.06"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
-
Bearings: 1x thrust ball bearing
-
Seal System: O-ring NBR (EPDM/FKM available)
-
Design: 90-degree configuration for compact installations
-
Performance: Maintenance-free, corrosion-resistant, live rotation under load
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel, Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTM
Thread Out: G2 3/8" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Length 1 (L1) (overall length) : 1.06"
Length 2 (L2): 0.39"
Weight: 5.5 oz
The Mosmatic DGK Swivel 32.153 is a compact, high-performance swivel engineered for high-pressure spray guns, hose connections, hydraulic systems, and tangle-free hose applications. Constructed from nickel-plated brass with stainless steel components, it delivers excellent corrosion resistance and long-term durability.
Equipped with a thrust ball bearing and O-ring NBR seal system (optional EPDM or FKM), this swivel enables live rotation at maximum pressure with very low torque. The maintenance-free design ensures reliability and smooth performance in even the most demanding settings.
Applications
-
High-pressure spray guns
-
Hose connection systems
-
Hydraulic line installations
-
Ceiling booms and wash bays
-
Industrial and automotive cleaning setups
Key Features
-
Model: Mosmatic DGK 32.153
-
Material: Nickel-plated brass and stainless steel
-
Thread IN: 3/8" NPTM
-
Thread OUT: 3/8" NPTM
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearings: 1x thrust ball bearing
-
Design: Compact, corrosion-resistant, low-torque rotation
-
Live Rotation: At full operating pressure
-
Overall Length: 2.13"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel, Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTM
Thread In: G1 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 2.13"
Length 2 (L2): 0.43"
Length 3 (L3): 0.47"
Weight: 4.2 oz
The Mosmatic DGK Swivel 32.053 is a high-performance swivel designed for tangle-free hose connections, high-pressure spray guns, and hydraulic applications. Built from nickel-plated brass and stainless steel, it offers exceptional durability and corrosion resistance in compact and demanding environments.
This swivel includes 1x thrust ball bearing and an O-ring NBR seal system (optional EPDM or FKM), delivering smooth, low-torque rotation under full pressure. With a maintenance-free design, it's ideal for use in high-pressure cleaning systems, industrial hydraulics, and hose management setups requiring reliable swivel action.
Applications
-
High-pressure spray guns and cleaning equipment
-
Hydraulic systems
-
Hose and boom connections
-
Tangle-free hose operation
-
Industrial wash bays and automotive shops
Key Features
-
Model: Mosmatic DGK 32.053
-
Material: Nickel-plated brass with stainless steel components
-
Thread IN: 1/4" NPTM
-
Thread OUT: 3/8" NPTM
-
Seal Type: O-ring NBR (optional EPDM or FKM)
-
Bearings: 1x thrust ball bearing
-
Design: Compact, corrosion-resistant, low-torque
-
Live Rotation: At full operating pressure
-
Overall Length: 2.09"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel, Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTM
Thread In: G1 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 2.09"
Length 2 (L2): 0.39"
Length 3 (L3): 0.39"
Weight: 3.9 oz
The Mosmatic DGK Swivel 32.089 is a compact, high-performance brass and stainless steel swivel designed for high and low-pressure cleaning, hose connections, hydraulic setups, and tangle-free hose applications. Engineered with live rotation under maximum pressure, this swivel offers superior functionality and a long-lasting, maintenance-free design.
The unit features a thrust ball bearing for smooth operation and an O-ring NBR seal system, with optional EPDM or FKM materials for enhanced chemical resistance. Its nickel-plated finish ensures durability and corrosion resistance in demanding environments.
Applications
-
High-pressure guns and lances
-
Hydraulic and pneumatic hose connections
-
Hose reels and ceiling booms
-
Industrial cleaning systems
-
Tangle-free hose management
Key Features
-
Model: Mosmatic DGK 32.089
-
Material: Nickel-plated brass and stainless steel
-
Thread IN (G1): 1/4" NPTM
-
Seal System: O-ring NBR (optional EPDM or FKM)
-
Bearing: 1x thrust ball bearing
-
Rotation: Live under maximum pressure
-
Maintenance-Free: Sealed stainless steel bearing
-
Overall Diameter: 0.40"
-
Overall Length: 2.70"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.94"
-
Max Pressure: 4000 PSI
-
Max RPM: 30
-
Max Temperature: 250°F
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 250°F
RPM: max 30 rpm
Material Type: Stainless steel, Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTM
S1: 3/8"
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.94"
Length 1 (L1) (overall length) : 2.70"
Length 2 (L2): 0.39"
Diameter 1 (D1): 0.40"
Diameter 2 (D2): 0.42"
Diameter 3 (D3): 0.54"
Weight: 2.6 oz
The Mosmatic WDEI Swivel 43.938B is engineered for high-performance and reliability in demanding cleaning and fluid handling systems. This stainless steel swivel features a sliding bearing system and comes with a standard NBR O-ring seal, with optional EPDM or FKM seals for added compatibility.
Designed to withstand challenging conditions, it supports a maximum pressure of 5800 PSI, a rotational speed of 30 RPM, and temperatures up to 250°F. The swivel connects via ¾" JIC Female (F) Thread IN to ¾" JIC Male (M) Thread OUT, ensuring efficient and secure integration.
Compatible with a pH range of 3–12, it handles filtered media (10 microns) and compressed air up to 290 PSI. Sold in a box of 25 units, this model is a reliable choice for industrial, automotive, and commercial applications requiring long-lasting swivel joints.
Model: WDEI ¾ JIC F x ¾ JIC M NW9 LP
*Specialty item, long lead times, please call for availability
Specs
Pressure: 5800 psi
Temperature: 250°F
RPM: 30
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR (EPDM or FKM optional)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: ¾ JIC F
Thread Out: G2 ¾" JIC M
Box: 25 pcs
Weight: 12.2 oz
The Mosmatic WDRS Swivel 41.922 is a premium stainless steel swivel coupling designed for high-pressure hose reels, automatic car wash systems, and industrial high-flow applications. Engineered for long-lasting performance and smooth operation, this swivel ensures reliable rotation and leak-free function in even the most demanding environments.
Featuring a robust dual bearing system with 2x radial ball bearings and an NBR O-ring seal, the WDRS 41.922 provides stable, low-friction performance and reduces wear over time. Its stainless steel construction offers excellent corrosion resistance, making it ideal for use with water, chemicals, and compressed air.
The swivel includes a Thread In of 3/4" NPTF and a Thread Out of 3/4" NPTF, with a nominal width (NW) of 3/4", overall diameter of 1.97", and overall length of 6.39". Rated for up to 3000 PSI, it operates at speeds up to 130 RPM and handles temperatures between 40°F and 180°F. Compatible with pH 3–12 media and 10-micron filtered compressed air up to 290 PSI.
Applications
-
Automatic car wash systems
-
Industrial high-pressure hose reels
-
High-flow water and chemical transfer lines
-
Pneumatic and compressed air tool connections
-
Rotary spray tools and surface cleaners
-
Commercial cleaning and fluid handling setups
Features
-
Durable stainless steel construction for superior corrosion resistance
-
Dual bearing system with 2x radial ball bearings for smooth, stable rotation
-
NBR O-ring seal for effective leak prevention and extended service life
-
Thread In: 3/4" NPTF | Thread Out: 3/4" NPTF
-
Nominal Width (NW): 3/4"
-
Max Pressure: 3000 PSI
-
Max Temperature Range: 40°F to 180°F
-
Max RPM: 130
-
Overall Diameter: 1.97" | Overall Length: 6.39" | Height: 1.69"
-
Compatible with pH 3–12 media and 10-micron filtered compressed air (290 PSI)
Specs
Pressure: 3000 psi
Temperature: 40°F - 180°F
RPM: max 130
Material Type: Stainless steel
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: Throughput/medium: ph 3-12, filtered 10 microns compressed air (290 psi)
Thread In: G1 3/4" NPTF
Thread Out: G2 3/4" NPTF
Nominal Width (NW): 3/4"
Wrench Size 2 (SW2): 1.26
Height (H): 1.69
Length 1 (L1) (overall length) : 6.39
Length 2 (L2): 3.54
Length 3 (L3): 3.06
Diameter (D) (overall diameter): 1.97
Weight: 45 oz
The Mosmatic WDEI Swivel 43.473V is a heavy-duty stainless steel swivel designed for high-pressure hose reels, industrial fluid transfer systems, pressure washers, and commercial washdown applications. Built for reliable performance under demanding conditions, this swivel features a smooth sliding bearing design and a durable FKM / Viton seal for enhanced resistance to high temperatures, chemicals, fuel, ozone, and harsh operating environments.
With 1/2" NPTF inlet and outlet threads, stainless steel construction, and a maximum working pressure of 5800 psi, the 43.473V is ideal for rigorous industrial and pressure washing use. The FKM / Viton seal offers excellent durability and long service life, with a typical temperature resistance range of -25°C to +200°C, making it well suited for automotive, aerospace, industrial, and pressure washing applications where dependable sealing performance is essential.
Please note: This item is a special order product with extended lead times and is non-cancelable and non-returnable.
Applications
- High-pressure hose reels
- Industrial washdown and rinsing systems
- Pressure washers and fluid transfer equipment
- OEM and commercial hose reel assemblies
- Automotive, aerospace, and industrial fluid handling applications
Features
- Stainless steel construction for durability and corrosion resistance
- Sliding bearing allows smooth, stable rotation under pressure
- Equipped with FKM / Viton seal for excellent resistance to heat, chemicals, fuel, ozone, and harsh environments
- Thread IN: 1/2" NPTF
- Thread OUT: 1/2" NPTF
- Overall Diameter: 1.57"
- Overall Length: 2.27"
- Nominal Width: 1/2"
- Rated for 5800 psi maximum working pressure
- Product temperature rating up to 250°F
- Operates at speeds up to 30 RPM
- Special order item with extended lead times
Showing 90/231
Next