Industrial and Process Cleaning Swivels
Sort by:
The Mosmatic DXL 36.351 90-Degree Swivel is a brass, nickel-plated high-pressure swivel built for durability in high-RPM and high-temperature cleaning applications. Designed for use in parts washers, tire cleaners, and automated wash equipment, this swivel delivers reliable rotation and superior sealing performance. A triple bearing system (2x radial and 1x thrust) ensures smooth movement, while the ceramic seal system stands up to demanding environments. Its corrosion-resistant brass construction, maintenance-free design, and compact 90° configuration make it ideal for tight spaces where precision and reliability are essential.
Applications:
-
High-pressure cleaning systems
-
Automated tire and parts washers
-
Self-rotating cleaning equipment
-
Industrial wash bays and car washes
-
High-RPM pressure cleaning tools
Key Features:
-
Brass with nickel plating for corrosion resistance
-
Compact 90-degree swivel design
-
Triple bearing system (2x radial, 1x thrust) for high-RPM use
-
Ceramic seal system for heat and pressure durability
-
Maintenance-free operation
-
Thread IN: 1/4" NPTF
-
Thread OUT: 1/4" NPTM
-
Overall Diameter: 0.98"
-
Overall Length: 3.25"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Operating Temp: 40°F to 250°F (4°C to 121°C)
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 1/4" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.67"
Length 1 (L1) (overall length) : 3.25"
Length 2 (L2): 0.43"
Diameter (D) (overall diameter): 0.98"
Weight: 7.1 oz
The Mosmatic DXL Swivel 36.054 is a brass, nickel-plated swivel designed for superior performance in high-pressure and high-RPM cleaning systems. Ideal for industrial applications such as tire cleaning, parts washers, and automated wash systems, this swivel ensures smooth and efficient operation with minimal maintenance. The advanced triple bearing system—composed of two radial ball bearings and one thrust ball bearing—delivers reliable rotational performance, even under demanding conditions. A high-durability ceramic seal system offers long-lasting protection against pressure and wear. Built with a bulkhead fitting for secure mounting, this swivel is both corrosion-resistant and maintenance-free.
Applications
-
High-pressure cleaning systems
-
Tire and wheel cleaning equipment
-
Industrial parts washers
-
Rotating cleaning heads and tools
-
Commercial wash bays and machinery
Key Features
-
Nickel-plated brass construction for strength and corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust ball bearing
-
Ceramic seal system for extended performance and durability
-
Rated for high RPM and high pressure
-
Bulkhead mounting for stability and secure installation
-
Maintenance-free operation
-
Thread IN: 1/4" NPTF | Thread OUT: 3/8" NPTF
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.42"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 3/8" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.87"
Length 1 (L1) (overall length) : 3.42"
Diameter (D) (overall diameter): 0.98"
Weight: 7.8 oz
The Mosmatic DXL Swivel 36.052 is a high-quality brass, nickel-plated swivel engineered for high-pressure and high-RPM cleaning systems. Designed for applications such as parts washers, tire cleaners, and industrial cleaning equipment, this swivel offers exceptional reliability and long-term durability. Its triple bearing system—featuring two radial ball bearings and one thrust bearing—ensures smooth rotation under load. The ceramic seal system delivers excellent wear resistance and leak protection, even under continuous use. Corrosion-resistant and maintenance-free, the DXL 36.052 includes a bulkhead fitting for secure installation in demanding environments.
Applications
-
High-pressure cleaning systems
-
Tire and wheel cleaning equipment
-
Industrial parts washers
-
Self-rotating tools in high-RPM environments
-
Wash bays and automated cleaning setups
Key Features
-
Brass body with nickel plating for durability and corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust bearing
-
Ceramic seal system for long-lasting performance
-
Designed for high-RPM and high-pressure use
-
Bulkhead mounting for stability and security
-
Maintenance-free operation
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTF
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.30"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 1/4" NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 3.30"
Diameter (D) (overall diameter): 0.98"
Weight: 7.5 oz
The Mosmatic DXL Swivel 36.153 is a premium nickel-plated brass swivel engineered for high-pressure, high-RPM cleaning applications. Ideal for tire cleaners, parts washers, and industrial spray systems, this swivel ensures reliable, long-term performance in demanding environments. The integrated triple bearing system—with two radial ball bearings and one thrust ball bearing—provides smooth rotation and enhanced load stability. A durable ceramic seal system offers superior resistance to pressure and wear, while the corrosion-resistant finish and maintenance-free design make it ideal for continuous, heavy-duty use.
Applications
-
High-pressure cleaning technology
-
Parts and component washers
-
Tire and wheel cleaning systems
-
High-RPM rotating equipment
-
Commercial and industrial wash bays
Key Features
-
Nickel-plated brass construction for strength and corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust ball bearing
-
Ceramic seal system ensures long-lasting leak protection
-
Built for high-pressure, high-RPM performance
-
Bulkhead fitting for secure mounting
-
Maintenance-free operation
-
Thread IN: 3/8" NPTF | Thread OUT: 3/8" NPTM
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.14"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8" NPTF
Thread Out: G2 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 3.14"
Length 2 (L2): 0.47"
Diameter (D) (overall diameter): 0.98"
Weight: 6.8 oz
The Mosmatic DXL Swivel 36.063 is a high-efficiency nickel-plated brass swivel designed for high-pressure, high-RPM cleaning applications. Perfect for use in parts washers, tire cleaning systems, and industrial cleaning equipment, this swivel ensures reliable, smooth operation under demanding conditions. Its triple bearing system—featuring two radial ball bearings and one thrust ball bearing—delivers superior rotational stability. A ceramic seal system provides long-lasting leak protection and optimal performance. With a corrosion-resistant finish and secure bulkhead fitting, the DXL 36.063 is built for durability, precision, and maintenance-free use in professional environments.
Applications
-
High-pressure cleaning systems
-
Parts washers
-
Tire and wheel cleaning equipment
-
High-RPM rotating cleaning tools
-
Industrial and commercial wash stations
Key Features
-
Nickel-plated brass body for enhanced corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust ball bearing
-
Ceramic seal system for extended leak-free performance
-
Built for high-RPM, high-pressure use
-
Bulkhead fitting for stable, secure mounting
-
Maintenance-free for ease of operation
-
Thread IN: 1/4" NPTF | Thread OUT: G3/8" M
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.14"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 G3/8" M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 3.14"
Length 2 (L2): 0.39"
Diameter (D) (overall diameter): 0.98"
Weight: 6.5 oz
The Mosmatic DXL Swivel 36.053 is a high-quality, nickel-plated brass swivel designed for high-pressure, high-RPM cleaning systems. Ideal for use in parts washers, tire cleaning tools, and professional cleaning equipment, this swivel delivers exceptional performance, corrosion resistance, and rotational stability. It features a triple bearing system with two radial ball bearings and one thrust bearing for smooth, reliable operation. The integrated ceramic seal system ensures long-lasting, leak-free performance under demanding conditions. Built for precision and longevity, the DXL 36.053 includes a bulkhead fitting for secure, maintenance-free installation.
Applications
-
High-pressure cleaning systems
-
Parts washers
-
Tire and wheel cleaning systems
-
High-RPM rotating spray tools
-
Industrial and commercial cleaning equipment
Key Features
-
Nickel-plated brass body for excellent corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust ball bearing
-
Ceramic seal system for superior leak prevention
-
Designed for high-RPM, high-pressure cleaning tasks
-
Bulkhead fitting for stable, secure mounting
-
Maintenance-free design
-
Thread IN: 1/4" NPTF | Thread OUT: 3/8" NPTM
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.14"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 3/8" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Length 1 (L1) (overall length) : 3.14"
Length 2 (L2): 0.47
Diameter (D) (overall diameter): 0.98"
Weight: 6.7 oz
The Mosmatic DXL Swivel 36.051 is a precision-engineered nickel-plated brass swivel designed for high-pressure cleaning systems and high-RPM rotating applications. Ideal for use in tire cleaners, parts washers, and high-speed cleaning equipment, this swivel offers exceptional reliability, corrosion resistance, and smooth performance. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for enhanced rotational stability. A ceramic seal system ensures superior leak protection under pressure. Built for long-term durability and effortless operation, the DXL 36.051 includes a bulkhead fitting for secure mounting and a maintenance-free design.
Applications
-
High-pressure cleaning systems
-
Tire cleaning equipment
-
Parts washers
-
High-RPM rotating cleaning tools
-
Commercial and industrial cleaning setups
Key Features
-
Nickel-plated brass construction for durability and corrosion resistance
-
Triple bearing system: 2x radial, 1x thrust ball bearing
-
Ceramic seal system for long-lasting, leak-free performance
-
Designed for high-RPM, high-pressure applications
-
Bulkhead fitting for secure, fixed mounting
-
Maintenance-free for ease of use
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTM
-
Max Pressure: 2500 PSI (17 MPa)
-
Max RPM: 2000
-
Temperature Range: 40°F – 250°F
-
Overall Diameter: 0.98"
-
Overall Length: 3.10"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
Specs
Pressure: 2500 psi (17 MPa)
Temperature: 40°- 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4" NPTF
Thread Out: G2 1/4" NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.67"
Length 1 (L1) (overall length) : 3.10"
Length 2 (L2): 0.43"
Diameter (D) (overall diameter): 0.98"
Weight: 6.7 oz
The Mosmatic DXF Swivel - 38.152 is a high-performance stainless steel swivel engineered for high-RPM, high-pressure cleaning systems. Ideal for demanding self-rotating applications such as surface cleaners, tire washers, and parts washers, this swivel features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth and stable rotation. The integrated ceramic seal system delivers exceptional resistance to heat, pressure, and wear. Weep holes act as an early seal failure warning system, while the flange mount provides fast, secure installation for a wide range of industrial cleaning tools.
Applications:
-
High-RPM self-rotating cleaning equipment
-
Surface cleaners in industrial and commercial settings
-
Tire and wheel washing systems
-
Parts washers and degreasing units
Key Features:
-
Stainless steel construction for maximum corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Long-life ceramic seal system for high-pressure use
-
Weep holes for proactive seal failure detection
-
Flange mount for quick and secure installation
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.65"
-
Max Pressure: 2500 PSI
-
Max RPM: 2000
-
Operating Temperature Range: 40°F to 250°F
Specs
Pressure: 2500 psi
Temperature: 40°F - 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel Plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 1/4"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36"
Length 1 (L1) (overall length): 1.65
Weight: 9.6oz
The Mosmatic DXF Swivel - 38.052 is a high-performance stainless steel swivel engineered for high-RPM, high-pressure cleaning systems. Designed for demanding self-rotating applications, this swivel is ideal for use in surface cleaners, tire washers, and parts washers. It features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, reliable rotation at high speeds. The integrated ceramic seal system ensures long-lasting leak protection, even in extreme temperature and pressure conditions. Built-in weep holes offer seal failure detection, while the flange mount allows for secure and easy installation.
Applications:
-
Self-rotating high-RPM cleaning tools
-
Commercial and industrial surface cleaners
-
Tire and wheel cleaning systems
-
Parts washers and degreasing equipment
Key Features:
-
Rugged stainless steel body for corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Advanced ceramic seal system for extended performance
-
Weep holes for early detection of seal failure
-
Flange mount for fast, secure installation
-
Thread IN: 1/4" NPTF | Thread OUT: 1/4" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.65"
-
Max Pressure: 2500 PSI
-
Max Speed: 2000 RPM
-
Temperature Range: 40°F to 250°F
Specs
Pressure: 2500 psi
Temperature: 40°F - 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel Plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 1/4"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36"
Length 1 (L1) (overall length): 1.65
Weight: 10.0oz
The Mosmatic DXF Swivel - 38.151 is a precision-engineered stainless steel swivel designed for high-RPM and high-pressure cleaning applications. Built to withstand demanding use in surface cleaners, tire and wheel washers, parts washers, and other self-rotating equipment, this swivel combines durability with performance. It features a triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth rotation and extended service life. A ceramic seal system ensures reliable operation in high-temperature and high-pressure conditions, while integrated weep holes provide early warning of seal failure. The flange mount design allows for quick, secure installation.
Applications:
-
High-RPM self-rotating cleaning tools
-
Industrial and commercial surface cleaners
-
Parts washers and degreasing equipment
-
Tire and wheel cleaning systems
Key Features:
-
Heavy-duty stainless steel construction for corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
High-performance ceramic seal system
-
Integrated weep holes for seal failure detection
-
Flange mount for fast, secure installation
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTM
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.45"
-
Pressure rating: 2500 PSI
-
Max RPM: 2000
-
Operating Temperature: 40°F to 250°F
Specs
Pressure: 2500 psi
Temperature: 40°F - 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel Plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 1/4"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.67
Diameter (D) (overall diameter): 2.36"
Length 1 (L1) (overall length): 1.45
Length 2 (L2): 0.43
Weight: 11.7oz
The Mosmatic DXF Swivel - 38.063 is a high-performance stainless steel swivel designed for high-RPM, self-rotating cleaning applications. Ideal for use in surface cleaners, tire and wheel cleaning systems, and industrial parts washers, this swivel ensures reliable performance under demanding conditions. It features a precision-engineered triple bearing system—two radial ball bearings and one thrust ball bearing—for smooth, long-lasting rotation. The integrated ceramic seal system offers exceptional resistance to pressure and temperature, while built-in weep holes provide early warning of seal failure. Its flange mount design ensures fast and secure installation in any setup.
Applications:
-
Self-rotating cleaning tools
-
Surface cleaners for industrial and commercial use
-
Tire and wheel cleaning systems
-
Parts washers and high-RPM cleaning applications
Key Features:
-
Stainless steel body for maximum corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Durable ceramic seal for extended high-RPM use
-
Seal failure indicator via integrated weep holes
-
Flange mount for easy and secure installation
-
Thread IN: G1 1/4" NPTF | Thread OUT: G2 G3/8" Male
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Pressure rating: Up to 2500 PSI
-
Max RPM: 2000
-
Temperature Range: 40°F to 250°F
Specs
Pressure: 2500 psi
Temperature: 40°F - 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel Plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 G3/8"M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36"
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.39
Weight: 13.0oz
The Mosmatic DXF Swivel - 38.053 is a high-performance stainless steel swivel designed for high-RPM cleaning applications where durability and precision are critical. Ideal for use in surface cleaners, tire cleaners, self-rotating systems, and industrial parts washers, this swivel features a robust triple bearing system—two radial ball bearings and one thrust ball bearing—to ensure smooth, high-speed rotation under demanding conditions. A premium ceramic seal system offers extended seal life, while built-in weep holes provide early seal failure warning. The integrated flange allows for easy and secure installation in various cleaning assemblies.
Applications:
-
High-RPM self-rotating cleaning tools
-
Surface cleaners for industrial and commercial use
-
Tire and wheel washing systems
-
Parts washers and degreasing equipment
Key Features:
-
Heavy-duty stainless steel body for superior corrosion resistance
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Advanced ceramic seal for durability under pressure and heat
-
Seal failure warning via integrated weep holes
-
Flange mount for fast, reliable installation
-
Thread IN: 1/4" NPTF | Thread OUT: 3/8" NPTM
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.49"
-
Pressure rating: Up to 2500 PSI
-
Max RPM: 2000
-
Operating Temperature: 40°F to 250°F
Specs
Pressure: 2500 psi
Temperature: 40°F - 250°
RPM: max 2,000 rpm
Material Type: Brass, Nickel Plated
Inner Part: Stainless steel
Seal: Ceramic
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 3/8"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36"
Length 1 (L1) (overall length): 1.49
Length 2 (L2): 0.47
Weight: 13.9oz
The Mosmatic DGF Swivel 35.351 is a professional-grade brass swivel designed for demanding high-pressure cleaning applications. Engineered with a nickel-plated finish for durability and corrosion resistance, this swivel ensures long-lasting performance in industrial environments. It incorporates a robust triple bearing system—featuring two radial ball bearings and one thrust ball bearing—for smooth, reliable rotation in both static and dynamic operations. Compatible with a variety of systems, the DGF swivel is an essential component for improving functionality and efficiency in pressure-based cleaning technologies.
Applications
-
High-pressure cleaning technology
-
Parts washer systems
-
Tire cleaning equipment
-
Self-rotating cleaning applications
Key Features
-
Durable brass body with nickel-plated finish
-
Triple bearing design: 2x radial, 1x thrust ball bearings
-
O-ring made of NBR (Nitrile Butadiene Rubber) for superior sealing
-
Thread IN: 1/4" NPTF to Thread OUT: 1/4" NPTM
-
Overall diameter: 2.36" | Length: 1.45" | NW: 1/4"
-
Handles pressure up to 4000 PSI
-
Operates at up to 1000 RPM
-
Temperature tolerance: 90°F at 1000 RPM, 250°F at 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 1/4"NPTF
Thread Out: G2 1/4"NPTM
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.67
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.45
Length 2 (L2): 0.43
Weight: 13.0oz
The Mosmatic DGF Swivel - 35.152 is a high-performance swivel engineered for demanding high-pressure cleaning applications. Made from durable brass with a corrosion-resistant nickel-plated finish, this swivel ensures reliable performance in harsh environments. It features a precision triple bearing system—two radial ball bearings and one thrust ball bearing—that allows for smooth and consistent rotation. The integrated O-ring NBR seal enhances durability and maintains leak-proof performance under pressure and extreme temperatures, making it ideal for self-rotating systems, tire cleaners, and industrial parts washers.
Applications:
-
High-pressure cleaning systems
-
Self-rotating cleaning tools
-
Tire and wheel cleaning equipment
-
Industrial parts washers
Key Features:
-
Durable brass construction with nickel plating
-
Triple bearing system: 2x radial + 1x thrust ball bearing
-
Reliable O-ring NBR sealing
-
Thread IN: 3/8" NPTF | Thread OUT: 1/4" NPTF
-
Nominal Width (NW): 1/4"
-
Overall Diameter: 2.36"
-
Overall Length: 1.65"
-
Max Pressure: 4000 PSI
-
Max Speed: 1000 RPM
-
Temperature Limits: 90°F @ 1000 RPM, 250°F @ 30 RPM
Specs
Pressure: 4000 psi
Temperature: 90°F (at 1,000 rpm) and 250°F (at 30 rpm).
RPM: max 1,000 rpm
Material Type: Brass, nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 3/8"NPTF
Thread Out: G2 G2 1/4"NPTF
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87
Wrench Size 2 (SW2): 0.75
Diameter (D) (overall diameter): 2.36
Length 1 (L1) (overall length): 1.65
Weight: 11.0oz
The Mosmatic DGG Swivel 33.553 (90 Degrees) is a high-performance brass swivel designed for high-pressure, self-rotating cleaning systems. With a compact 90° design, it is ideal for parts washers, tire cleaners, and industrial surface cleaners requiring precise fluid rotation and high durability.
This swivel includes a robust triple bearing system (2x radial and 1x thrust ball bearing) that ensures smooth operation under pressure. The O-ring NBR seal system provides reliable leak protection, with optional upgrades to EPDM or FKM for greater chemical compatibility. Its nickel-plated brass construction enhances corrosion resistance, while the bulkhead fitting makes installation seamless in various cleaning equipment.
Applications
-
High-pressure cleaning systems
-
Self-rotating nozzles
-
Parts washers and degreasers
-
Tire and underbody cleaning equipment
-
Industrial surface cleaning machines
Key Features
-
Design: 90° angled swivel
-
Material: Brass, nickel plated
-
Seal Type: O-ring NBR (optional EPDM or FKM)
-
Bearing System: Triple (2x radial, 1x thrust)
-
Thread IN (G1): M22x1.5M
-
Thread OUT (G2): G3/8" M
-
Overall Diameter: 1.34"
-
Overall Length: 2.76"
-
Nominal Width (NW): 1/4"
-
Wrench Size (SW): 0.87"
-
Max Pressure: 4000 PSI
-
Max RPM: 1000
-
Max Temperature:
-
90°F at 1000 RPM
-
250°F at 30 RPM
-
-
Mounting Type: Bulkhead
-
Maintenance: Maintenance-free
Specs
Pressure: 4000 psi (27.5 MPa)
Temperature: 90°F at 1000 RPM, 250°F at 30 RPM
RPM: max 1,000 rpm
Material Type: Brass, Nickel plated
Inner Part: Stainless steel
Seal: O-ring NBR (optional: EPDM or FKM)
Throughput/medium: ph 3-12 / filtered 10 microns, compressed air (290 psi)
Thread In: G1 M22X1.5M
Thread Out: G2 G3/8"M
Nominal Width (NW): 1/4"
Wrench Size 1 (SW1): 0.87"
Wrench Size 2 (SW2): 0.75"
Wrench Size 3 (SW3): 1.34"
Diameter (D) (overall diameter): 1.34"
Length 1 (L1) (overall length) : 2.76"
Length 2 (L2): 0.47"
Weight: 11.7 oz
Showing 255/283
Next
